This topic

Full Fibre 900 with own router

xeroshikari — Sun, 21 Jun 2020 17:57:56 GMT

Hi there,

I'm considering switching over from Virgin as fibre 900 is now available in my area. I currently use an EdgeRouter Lite with the virgin router in modem mode.

I have read conflicting things on this forum and others about the ability to do similar with BT broadband.

Do new full fibre 900 installations still come with an Openreach ONT? If so could that be plugged into my Edgerouter for the WAN connection, negating any need for using a BT hub at all?

If not, I read that I can use a Draytek Vigor 130 as the modem and then plug that into my existing router. Could anyone confirm that?

Re: Full Fibre 900 with own router

imjolly — Sun, 21 Jun 2020 18:20:40 GMT

The ONT is the modem so no draytek is needed. Any router with a wan port should connect to the ONT

Re: Full Fibre 900 with own router

busterboy1 — Sun, 21 Jun 2020 18:30:55 GMT

Do new full fibre 900 installations still come with an Openreach ONT? If so could that be plugged into my Edgerouter for the WAN connection

____________________________________________________________________________________

Openreach will fit the ONT whether it is the Huawei or the latest Nokia unit.

Any router of your choice can of course be fitted should you not want the supplied Home Hub from BT

Re: Full Fibre 900 with own router

xeroshikari — Sun, 21 Jun 2020 18:32:49 GMT

Are new installations always done with a separate ONT? I'd read somewhere that some fibre installs are using a 2 in 1 router/modem so you would have to provide your own modem if using your own router.

Re: Full Fibre 900 with own router

pippincp — Sun, 21 Jun 2020 18:45:21 GMT

All Openreach FTTP connections are with an ONT.

Re: Full Fibre 900 with own router

licquorice — Sun, 21 Jun 2020 19:34:44 GMT

@xeroshikari I suspect you are confusing FTTP with FTTC.

Re: Full Fibre 900 with own router

pedrofreitas — Fri, 14 Aug 2020 09:40:27 GMT

Hello,

I have an Asus RT-AC56U. Any of you knows if I would be able to use their router?

Thanks!

Re: Full Fibre 900 with own router

brookheather — Fri, 14 Aug 2020 09:53:50 GMT

@pedrofreitaswrote:
Hello,
I have an Asus RT-AC56U. Any of you knows if I would be able to use their router?
Thanks!

It will work but probably only up to 200-300Mbps download speed so not suitable for Fibre 900.

Re: Full Fibre 900 with own router

busterboy1 — Fri, 14 Aug 2020 10:00:01 GMT

@pedrofreitas

The Asus RT version I believe is cable / FTTP only without a built in modem.

If you have FTTC you will of course need a modem in which case your router will work but you will need a separate modem.

If you are FTTP yes it will work perfect for the lower end tiers.

Re: Full Fibre 900 with own router

Jags007 — Thu, 19 May 2022 11:45:02 GMT

Hi Guys hope all are safe and well, I have an ASUS RT 3200 and have just had the 900 FFTP service installed. I assume I can change the BT hub to this - what config settings do I need to change ?

Re: Full Fibre 900 with own router

licquorice — Thu, 19 May 2022 12:39:35 GMT

PPPoE username bthomehub@btbroadband.com password BT.