This topic https://community.bt.com/t5/Archive-Staging/Interleaving-On-Request-for-Fast-Path-Please-DLM-RESET/m-p/2076783#M1203015 <P>Latency is controlled automatically by the DLM and you will not get a reset unless you had line connection problems and not just for latency</P> <P>not like previous adsl where &nbsp;the mods were able to change latency</P> Wed, 29 Jul 2020 19:08:39 GMT imjolly 2020-07-29T19:08:39Z Interleaving On, Request for Fast Path Please - DLM RESET https://community.bt.com/t5/Archive-Staging/Interleaving-On-Request-for-Fast-Path-Please-DLM-RESET/m-p/2076773#M1203014 <P>Hi,</P><P>So ive purchased billion 8800nl r2. Been using it to monitor my stats. Currently have Broadband VDSL with BT.</P><P>Noticed i have an interleaving depth of 8 on my download which means im not on Fast Path.</P><P>Could i please kindly ask the mods for my connection is switched to fast path / DLM reset?</P><P>My stats:</P><TABLE width="100%" cellspacing="2" cellpadding="0"><TBODY><TR><TD>xDSL</TD></TR><TR><TD width="35%">Mode</TD><TD>VDSL2</TD></TR><TR><TD>Traffic Type</TD><TD>PTM</TD></TR><TR><TD>Status</TD><TD>Up</TD></TR><TR><TD>Link Power State</TD><TD>L0</TD></TR><TR><TD>&nbsp;</TD></TR><TR><TD>&nbsp;</TD><TD>Downstream</TD><TD>Upstream</TD></TR><TR><TD>Line Coding (Trellis)</TD><TD>On</TD><TD>On</TD></TR><TR><TD>SNR Margin (dB)</TD><TD>6.6</TD><TD>15.3</TD></TR><TR><TD>Attenuation (dB)</TD><TD>11.5</TD><TD>0.0</TD></TR><TR><TD>Output Power (dBm)</TD><TD>13.1</TD><TD>1.4</TD></TR><TR><TD>Attainable Rate (Kbps)</TD><TD>82509</TD><TD>29077</TD></TR><TR><TD>&nbsp;</TD></TR><TR><TD>Rate (Kbps)</TD><TD>79780</TD><TD>19999</TD></TR><TR><TD>&nbsp;</TD></TR><TR><TD>B (# of bytes in Mux Data Frame)</TD><TD>243</TD><TD>237</TD></TR><TR><TD>M (# of Mux Data Frames in an RS codeword)</TD><TD>1</TD><TD>1</TD></TR><TR><TD>T (# of Mux Data Frames in an OH sub-frame)</TD><TD>0</TD><TD>42</TD></TR><TR><TD>R (# of redundancy bytes in the RS codeword)</TD><TD>10</TD><TD>16</TD></TR><TR><TD>S (# of data symbols over which the RS code word spans)</TD><TD>0.0974</TD><TD>0.3781</TD></TR><TR><TD>L (# of bits transmitted in each data symbol)</TD><TD>20865</TD><TD>5374</TD></TR><TR><TD>D (interleaver depth)</TD><TD>8</TD><TD>1</TD></TR><TR><TD>I (interleaver block size in bytes)</TD><TD>254</TD><TD>127</TD></TR><TR><TD>N (RS codeword size)</TD><TD>254</TD><TD>254</TD></TR><TR><TD>Delay (msec)</TD><TD>0</TD><TD>0</TD></TR><TR><TD>INP (DMT symbol)</TD><TD>50.00</TD><TD>0.00</TD></TR><TR><TD>&nbsp;</TD></TR><TR><TD>OH Frames</TD><TD>0</TD><TD>0</TD></TR><TR><TD>OH Frame Errors</TD><TD>0</TD><TD>0</TD></TR><TR><TD>RS Words</TD><TD>133662832</TD><TD>34559246</TD></TR><TR><TD>RS Correctable Errors</TD><TD>3577</TD><TD>1</TD></TR><TR><TD>RS Uncorrectable Errors</TD><TD>0</TD><TD>0</TD></TR><TR><TD>&nbsp;</TD></TR><TR><TD>HEC Errors</TD><TD>0</TD><TD>0</TD></TR><TR><TD>OCD Errors</TD><TD>0</TD><TD>0</TD></TR><TR><TD>LCD Errors</TD><TD>0</TD><TD>0</TD></TR><TR><TD>Total Cells</TD><TD>501388827</TD><TD>0</TD></TR><TR><TD>Data Cells</TD><TD>26432689</TD><TD>0</TD></TR><TR><TD>Bit Errors</TD><TD>0</TD><TD>0</TD></TR><TR><TD>&nbsp;</TD></TR><TR><TD>Total ES</TD><TD>0</TD><TD>0</TD></TR><TR><TD>Total SES</TD><TD>0</TD><TD>0</TD></TR><TR><TD>Total UAS</TD><TD>27</TD><TD>27</TD></TR></TBODY></TABLE> Wed, 29 Jul 2020 18:47:21 GMT https://community.bt.com/t5/Archive-Staging/Interleaving-On-Request-for-Fast-Path-Please-DLM-RESET/m-p/2076773#M1203014 RJ1010 2020-07-29T18:47:21Z Re: Interleaving On, Request for Fast Path Please - DLM RESET https://community.bt.com/t5/Archive-Staging/Interleaving-On-Request-for-Fast-Path-Please-DLM-RESET/m-p/2076783#M1203015 <P>Latency is controlled automatically by the DLM and you will not get a reset unless you had line connection problems and not just for latency</P> <P>not like previous adsl where &nbsp;the mods were able to change latency</P> Wed, 29 Jul 2020 19:08:39 GMT https://community.bt.com/t5/Archive-Staging/Interleaving-On-Request-for-Fast-Path-Please-DLM-RESET/m-p/2076783#M1203015 imjolly 2020-07-29T19:08:39Z