This topic

Fibre 2 Upgrade - Slower Speed

Wahzy — Tue, 06 Oct 2020 22:29:43 GMT

Hi all,

I have just upgraded to BT Fibre 2 from an old Fibre subscription which had 6 months left. For the extra £2 a month and a guaranteed 45mbps I thought why not! Previously only maxing out at 36mbps (YES less than the 38mbps guarantee).

So on 1st October the activation took place. Since then my speeds have crashed. Maxing out 26mbps now. BT Engineer will visit in two weeks which isn't great. They are saying it looks like crossed wires??? Nothing in my house has changed apart from clicking 'change subscription'.

Has anyone else had a similar issue and any advice? If this doesn't work out I'll just cancel my contract.

Thanks a lot,

Alex.

Re: Fibre 2 Upgrade - Slower Speed

Wahzy — Tue, 06 Oct 2020 22:36:57 GMT

Re: Fibre 2 Upgrade - Slower Speed

imjolly — Wed, 07 Oct 2020 07:50:56 GMT

in order for the forum members to help please can you post the stats from your router (if hub enter 192.168.1.254 in your browser) and if HH5 then go to troubleshooting then helpdesk and if HH6/SH2 then advanced settings then technical log information .

Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal

have you tried connecting to test socket with a filter to see if that improves your connection speed

Someone may then be able to offer help/assistance/suggestions to your problem

Re: Fibre 2 Upgrade - Slower Speed

Wahzy — Wed, 07 Oct 2020 08:14:49 GMT

This is a list of your BT Smart Hub settings and current statistics.

Product name:

BT Hub 6A

Serial number:

+084316+NQ65241335

Firmware version:

SG4B1000E020

Firmware updated:

26-Aug-2019

Board version:

1.0

Gui version:

1.115.0

DSL uptime:

0 Days, 21 Hours 57 Minutes 30 Seconds

Data rate:

7.99 Mbps / 31.70 Mbps

Maximum data rate:

8020 / 32274

Noise margin:

6.5 dB / 6.1 dB

Line attenuation:

29 dB

Signal attenuation:

18.5 dB / 29 dB

VPI / VCI:

0/38

Modulation:

G_993_2_ANNEX_B

Latency type:

Fast Path

Data sent / received:

605 MB Uploaded / 19 GB Downloaded

Broadband username:

bthomehub@btbroadband.com

BT Wi-fi:

Active

2.4 GHz wireless network name:

BTHub6-C5WP

2.4 GHz wireless channel:

Smart (Channel 1)

5 GHz wireless network name:

BTHub6-C5WP-5

5 GHz wireless channel:

Smart (Channel 36)

Wireless security:

WPA2 (Recommended)

Wireless mode:

Mode 1

Firewall:

MAC address:

24:20:C7:9A:F5:45

Software variant:

Boot loader:

7.33.1

Re: Fibre 2 Upgrade - Slower Speed

Wahzy — Wed, 07 Oct 2020 08:16:04 GMT

I have connected to the test socket and the speeds are still 26mbps. So that confirms nothing is wrong with my internal wiring. I suspect it's the hub or an issue at BT's end since making the switch.

Re: Fibre 2 Upgrade - Slower Speed

pippincp — Wed, 07 Oct 2020 08:37:54 GMT

Quiet line test?

Re: Fibre 2 Upgrade - Slower Speed

Wahzy — Wed, 07 Oct 2020 08:39:37 GMT

Quiet line test was silent.

Re: Fibre 2 Upgrade - Slower Speed

imjolly — Wed, 07 Oct 2020 08:42:50 GMT

even your attainable is only 32mb and with your attenuation you are a long way from the cabinet - which conflicts with the dslchecker results which shows speed range 80/60mb

can you connect to test socket and post new stats was it your number repeated on quiet line test

Re: Fibre 2 Upgrade - Slower Speed

Wahzy — Wed, 07 Oct 2020 08:48:09 GMT

Plugged directly into test socket and quiet line test was good.

his is a list of your BT Smart Hub settings and current statistics.

Product name:

BT Hub 6A

Serial number:

+084316+NQ65241335

Firmware version:

SG4B1000E020

Firmware updated:

26-Aug-2019

Board version:

1.0

Gui version:

1.115.0

DSL uptime:

0 Days, 0 Hours 1 Minutes 33 Seconds

Data rate:

8.97 Mbps / 30.21 Mbps

Maximum data rate:

8975 / 30329

Noise margin:

6.3 dB / 6.3 dB

Line attenuation:

21 dB

Signal attenuation:

18.3 dB / 21 dB

VPI / VCI:

0/38

Modulation:

G_993_2_ANNEX_B

Latency type:

Fast Path

Data sent / received:

75 kB Uploaded / 105 kB Downloaded

Broadband username:

bthomehub@btbroadband.com

BT Wi-fi:

Active

2.4 GHz wireless network name:

BTHub6-C5WP

2.4 GHz wireless channel:

Smart (Channel 1)

5 GHz wireless network name:

BTHub6-C5WP-5

5 GHz wireless channel:

Smart (Channel 36)

Wireless security:

WPA2 (Recommended)

Wireless mode:

Mode 1

Firewall:

MAC address:

24:20:C7:9A:F5:45

Software variant:

Boot loader:

7.33.1

Re: Fibre 2 Upgrade - Slower Speed

Wahzy — Wed, 07 Oct 2020 08:48:56 GMT

Re: Fibre 2 Upgrade - Slower Speed

imjolly — Wed, 07 Oct 2020 08:53:32 GMT

dslchecker just same as earlier post

Re: Fibre 2 Upgrade - Slower Speed

Wahzy — Wed, 07 Oct 2020 09:00:24 GMT

Any suggestions?

Re: Fibre 2 Upgrade - Slower Speed

imjolly — Wed, 07 Oct 2020 09:06:51 GMT

are you able to connect to test socket with filter and post new hub stats?

Re: Fibre 2 Upgrade - Slower Speed

Wahzy — Wed, 07 Oct 2020 09:07:33 GMT

I've just done this?