This topic

Ubiquiti Dream Machine Pro With BT FTTP

KennyLoggins — Tue, 01 Dec 2020 22:58:52 GMT

I’m currently building a home network and plan to operate a ubiquiti setup in my cabinet with a ubiquiti dream machine pro taking up one of the racks. Before I select this product does anyone know if there are any issues with using this device with my FTTP setup.?

I plan on using an Ethernet cable from the open reach modem to the dream machine device but was wondering what address I need to put in for this to work correctly. I read somewhere else that I need to enter bthomehub@broadband.com and ‘bt’ in the PPPoe connection settings on the controller?

thanks

Re: Ubiquiti Dream Machine Pro With BT FTTP

pippincp — Tue, 01 Dec 2020 23:00:53 GMT

You shouldn't have any problems. User name & password are correct.

Re: Ubiquiti Dream Machine Pro With BT FTTP

KennyLoggins — Tue, 01 Dec 2020 23:15:54 GMT

Ok thanks for the quick reply 👍

Also I noticed on my open reach modem there are four RJ45 outputs with only port one operating with my BT home hub router. Can you use the other three ports as back ups or do they not work ?

Re: Ubiquiti Dream Machine Pro With BT FTTP

pippincp — Tue, 01 Dec 2020 23:19:42 GMT

They don't work.

Re: Ubiquiti Dream Machine Pro With BT FTTP

KennyLoggins — Tue, 01 Dec 2020 23:53:08 GMT

👍

Re: Ubiquiti Dream Machine Pro With BT FTTP

KennyLoggins — Sat, 05 Dec 2020 09:53:25 GMT

Just to bring this up again... So do I need to connect the dream machine pro to the open reach router or my bt home hub on the WAN port? I was hoping I could bypass the whole home hub ...

Re: Ubiquiti Dream Machine Pro With BT FTTP

licquorice — Sat, 05 Dec 2020 11:02:33 GMT

The hub is no longer needed, just connect the dream machine directly to the ONT.

Re: Ubiquiti Dream Machine Pro With BT FTTP

KennyLoggins — Sat, 05 Dec 2020 11:44:45 GMT

Ok thanks - I want to set the dream machine up first in my office with wireless points before transferring it over to the actual cabinet. When this is set up and I unplug it all temporarily for the install into rack can I use my BT home hub straight away again (as I need internet during this ‘down’ time)or will I have to log out in some way of the ubiquiti.

Re: Ubiquiti Dream Machine Pro With BT FTTP

licquorice — Sat, 05 Dec 2020 11:57:17 GMT

You can just swap between devices at will, no logging in or out required.

Re: Ubiquiti Dream Machine Pro With BT FTTP

KennyLoggins — Sat, 05 Dec 2020 12:54:29 GMT

Thanks 👍