This topic

Port Forwarding / DDNS Question

michaeljpower73 — Mon, 14 Dec 2020 13:50:18 GMT

Hey All,

I have a home network which has got a CCTV and House Alarm system running through my Draytek Router. I want to move onto the Home Hub 2 as I've now got 900MB Fibre.

The two devices internal have a fixed IP and I have set the range on the Home Hub to be the same range i.e. 192.168.0.X

I can reach the CCTV and Alarm internally no issues.

I have set up a NO IP DDNS Service and set a host to the external IP and then gone and set up the port forward rules for each port I want to use (as per my previous config - TCP and UDP rules as needed).

Unfort I can't get a hit on the devices using the new hostname I set up through NO IP.

Clearly a port forward or rule / config issue.

Anyone got any tips at all on any other setting required and does anyone know if there is a limit on the amount of rules you can set up for port forwarding?

Any advice appreciated.

Mike

Re: Port Forwarding / DDNS Question

TimCurtis — Mon, 14 Dec 2020 14:51:07 GMT

@michaeljpower73

This thread that I've been posting into today might help you.

Re: Port Forwarding / DDNS Question

michaeljpower73 — Mon, 14 Dec 2020 14:58:47 GMT

Thanks Tim - I will have a look through it now.

Re: Port Forwarding / DDNS Question

Anonymous — Mon, 14 Dec 2020 15:07:44 GMT

Check your public IP address then log into your DDNS account and make sure the IP address on your account matches.

Re: Port Forwarding / DDNS Question

michaeljpower73 — Mon, 14 Dec 2020 15:09:19 GMT

Tried all that unfort and they match perfect 🙂