This topic

Whole home disks

Harboro_Mike — Mon, 08 Mar 2021 13:07:41 GMT

Hi guys

quick question before I create problems for myself, can the SSID for the Whole home disks be the same as is setup for the router or is it better to have different ?

Thanks

Re: Whole home disks

Gary_C — Mon, 08 Mar 2021 14:01:25 GMT

Your better to turn the wifi off on the router (as the first disk would probably be very near it ?) then set the disks to the same SSID and password.
In that way, you dont have to enter new wifi details in all your devices.
if you are running the first disk quite a way away from the router and want to keep the wifi on the router then it might cause problems as the mesh will not be able to steer a device away from the router to the discs.

Re: Whole home disks

Harboro_Mike — Mon, 08 Mar 2021 14:15:21 GMT

Thank you 👍🏻

Re: Whole home disks

GeneralPostoffice — Mon, 08 Mar 2021 16:56:56 GMT

Yes, once set up you can just give the whole home discs the same SSID/pw as your router wifi, that way you don't need to reconfigure all your devices. The mesh system is designed to replace the function of the Wireless AP in your router.

Just be sure to disable the WiFi on the router once the mesh network is up and configured. You don't want to cause contention issues.

Once you've done that, power cycle all your wifi gadgets to make sure they have a fresh connection to your mesh. I did notice that I had to redo the network set up on my Blink Link (video camera system) box again following the change, as it was behaving a bit strangely. All my other stuff (phones, tablets, laptops, kindles, chromecasts) were fine.