https://community.bt.com/t5/BT-Devices/Port-forwarding/m-p/2251444#M28223 <P>Hi, I have a bt smart hub 2 for the last 6 months or so I've been running a Pi Network node with very little problems but recently I've been having few problems one of them is port forwarding, in order to run the node I have to have ports 31400 to 31409 open, when I started having problems I installed a fresh windows pro on my dedicated node pc,&nbsp; installed all the other components and tried to run the node the ports started to close one by one until all were closed. I have tried all kind of things, I've tried different hubs I even bought a new smart hub 2, I tried turning off and on again, I tried factory reset, I tried opening the ports from my other pcs I tried opening the ports with just windows installed on my dedicated node, nothing works. On the Hub Manager the rules are saved but when I check the ports with "telnet", "canyouseeme.org" and "pi-mods.de/nodeports/" they come back as closed even when Itried other ports like 80 or 50000 same problem.&nbsp;</P><P>Anyone knows how to solve this? please???</P> Sun, 11 Sep 2022 20:38:34 GMT Andalous 2022-09-11T20:38:34Z https://community.bt.com/t5/BT-Devices/Port-forwarding/m-p/2251444#M28223 <P>Hi, I have a bt smart hub 2 for the last 6 months or so I've been running a Pi Network node with very little problems but recently I've been having few problems one of them is port forwarding, in order to run the node I have to have ports 31400 to 31409 open, when I started having problems I installed a fresh windows pro on my dedicated node pc,&nbsp; installed all the other components and tried to run the node the ports started to close one by one until all were closed. I have tried all kind of things, I've tried different hubs I even bought a new smart hub 2, I tried turning off and on again, I tried factory reset, I tried opening the ports from my other pcs I tried opening the ports with just windows installed on my dedicated node, nothing works. On the Hub Manager the rules are saved but when I check the ports with "telnet", "canyouseeme.org" and "pi-mods.de/nodeports/" they come back as closed even when Itried other ports like 80 or 50000 same problem.&nbsp;</P><P>Anyone knows how to solve this? please???</P> Sun, 11 Sep 2022 20:38:34 GMT https://community.bt.com/t5/BT-Devices/Port-forwarding/m-p/2251444#M28223 Andalous 2022-09-11T20:38:34Z https://community.bt.com/t5/BT-Devices/Port-forwarding/m-p/2251606#M28231 <P>If the ports really are closed (as opposed to being in stealth mode), and you have the rules set up correctly on the SmartHub 2 then the chances are that the problem lies with the Windows firewall</P> Mon, 12 Sep 2022 20:48:15 GMT https://community.bt.com/t5/BT-Devices/Port-forwarding/m-p/2251606#M28231 Les-Gibson 2022-09-12T20:48:15Z