This topic

Digital Voice

Embraer — Mon, 26 Sep 2022 21:23:32 GMT

Been advised I’m being moved over to Digital Voice next week and need a couple of questions answered by the Hive Mind thanks

1) Is it compulsory?

2) I currently use a Netgear Nighthawk Router for all NAT routing, is it possible if I have to start using Digital Voice to connect the BT Smart Hub 2 in some form of Bridge Mode and just add it to my existing setup which works to my liking to allow me to use the BT service?

Re: Digital Voice

Les-Gibson — Mon, 26 Sep 2022 21:30:54 GMT

1. You may be able to fend it off for a short while if you have special needs (medical etc) but the copper network is being retired so ultimately; Yes.

2. No

Re: Digital Voice

gg30340 — Mon, 26 Sep 2022 22:06:26 GMT

To use BT Digital Voice the Smarthub2 has to be the first in the chain.

See this thread that might assist you rather than repeating what has already been asked and answered.

https://community.bt.com/t5/Home-phone-including-Digital/Digital-Voice-with-different-Router/td-p/2095493

Re: Digital Voice

JonMace — Tue, 27 Sep 2022 12:26:43 GMT

In short.

Cant be done.

Long answer.

For digital voice SH2 has to come 1st, as you cannot turn off DHCP on SH2 you will end up with double NATing.

You could setup a DMZ to the 2nd router, and turn off DHCP on that so SH2 does NATing and Digital Voice and 2nd Router does everything else.

Re: Digital Voice

Les-Gibson — Tue, 27 Sep 2022 12:48:18 GMT

@JonMace

You can turn off DHCP on the SH2, (My Network [IPv4 configuration tab])

Re: Digital Voice

licquorice — Tue, 27 Sep 2022 13:10:15 GMT

@JonMace You will still be double natting even if you turn off DHCP if you connect 2 routers together LAN port to WAN port.

Re: Digital Voice

JonMace — Tue, 27 Sep 2022 13:23:59 GMT

Thanks did not look there