This topic

Digital voice

rayclay45 — Thu, 02 Nov 2023 13:49:19 GMT

Installed Smart Hub 2 & DV Adapter - all ok but:

Adapter doesn't go to solid green when paired, is this faulty or can only be solid once I'm switched to DV?

Set up refers to base pin default 000. I haven't changed this as I cannot see it on my Hub Manager. The only option seen is to change admin password - where is the option to change this 4 digit base code?

Thanks Ray

Re: Digital voice

imjolly — Thu, 02 Nov 2023 13:51:38 GMT

normally the adapter does not pair until DV is active on SH2 you can check by going to hub manager and should see phone number and whether active or not

Re: Digital voice

Anonymous — Thu, 02 Nov 2023 14:04:13 GMT

DECT base PINs are usually set from a handset paired to that base, in this case the SH2. If you don't have a BT DV handset paired then I'd suspect it can't be changed.

Re: Digital voice

rayclay45 — Thu, 02 Nov 2023 15:59:33 GMT

thank you, do you have an answer to the 2nd question re DV Adaptor?

Re: Digital voice

licquorice — Thu, 02 Nov 2023 16:09:24 GMT

Which second question would that be? Both questions have been answered.

Re: Digital voice

Anonymous — Thu, 02 Nov 2023 16:15:09 GMT

Afraid not beyond what @imjolly has already posted. But maybe try it in the same room as the SH2, just to rule out a range issue.

Re: Digital voice

rayclay45 — Thu, 02 Nov 2023 16:19:43 GMT

Thank you

Re: Digital voice

rayclay45 — Thu, 02 Nov 2023 16:22:42 GMT

thank You

Re: Digital voice

rayclay45 — Thu, 02 Nov 2023 16:23:09 GMT

yes, second question also answere