This topic

BT4600 phone set up

robinknock100 — Sun, 31 Mar 2024 17:07:26 GMT

How can I unmute all my saved numbers as I cannot dial out on some, as soon as I unmute the number I can use it or is it the phone itself that needs unmuting if so how do I do it

Re: BT4600 phone set up

Anonymous — Sun, 31 Mar 2024 17:48:34 GMT

No idea what you're referring to?

Re: BT4600 phone set up

robinknock100 — Sun, 31 Mar 2024 17:58:04 GMT

I was dialing out and getting the engaged tone but I found that if I dialed the number or used speed dial or numbers saved in the phone book and at the same time pressed mute/unmute the next time I dialed it it would connect, seems strange to me also. I also cannot understand how they all became muted

Re: BT4600 phone set up

Anonymous — Sun, 31 Mar 2024 18:14:55 GMT

"Mute" simply disconnects the microphone when on a call, you cannot mute a contact. So something odd going on there. Maybe try powering down the base & handsets for half an hour & try again.

Re: BT4600 phone set up

robinknock100 — Sun, 31 Mar 2024 18:47:49 GMT

Sorry, when you say power down do you literally mean unplug from the wall. Thanks for your patience

Re: BT4600 phone set up

Anonymous — Sun, 31 Mar 2024 18:58:17 GMT

Unplug the base from the mains & maybe remove the batteries from the handset(s) for good measure.

Re: BT4600 phone set up

robinknock100 — Sun, 31 Mar 2024 20:52:23 GMT

I have tried your suggestion but no joy

Re: BT4600 phone set up

Anonymous — Mon, 01 Apr 2024 08:04:33 GMT

Just a thought but are you actually unable to dial out? Could it be that what you think is an engaged signail is actually the1571 service alerting you to a voicemail?

Re: BT4600 phone set up

robinknock100 — Mon, 01 Apr 2024 08:38:48 GMT

No, I am not able to dial out, there are just a couple of numbers that will work on speed dial

I have set up the old phones and still cannot dial out so I must assume it’s the line set up, I will contact the supplier