This topic

HP Envy 600e (6032) won't connect to BT wifi

Anne1536 — Tue, 28 May 2024 19:41:15 GMT

I tried to set up the new printer yesterday. It connected and I printed but I could not register it on Instaprint (for cartridges cheaper by mail) . Got in touch with HP agent who tried everything but no luck. Said it was the router and gave me a long set of questions* to ask BT. I don't know how to get in touch with BT or whether they will do this.The printer it finds is not mine, different type and serial number.

I have no idea what to do now. I am not a techie and the information below goes way over my head.
I hope someone can help or I have lost my money. Have a useless printer and need to buy another!

We refer you to your internet service provider and tell them the following:

1. Make the 2.4ghz and 5ghz separated into two networks

2. Change the channel of your 2.4ghz into 6 or 11

(If it set to 6 change it to 11, if it set to 11 change it to 6)

3. Disable WPS (Wi-Fi Protected Setup)

4. Update firmware of the router

5. Multi-casting (Multicast Filtering) needs to be on or enabled (Allows Bonjour Connectivity)

6. Allow Wireless Ports, these can also be blocked in security software:

Incoming (UDP) ports : 137, 138, 161, 427

Outgoing (TCP) ports : 137, 139, 427, 9100, 9220, 9500

7. Recommended that the network name and password DO NOT contain and spaces/punctuation or special characters

8. Encryption should be WPA-TKIP or WPA2-TKIP/AES

9. Make the password 10 digit alphanumeric

10. Dual broadcasting enabled (for wireless b/g and n networks)

11. Media Access Control (MAC) filtering must be disabled

12. The built in Firewall should be at the default or lower settings

13. Turn DMZ on from the router then add the static IP Address of the printer

Re: HP Envy 600e (6032) won't connect to BT wifi

licquorice — Tue, 28 May 2024 20:10:28 GMT

I have no idea why you think you have a useless printer that needs to be changed.

The printer works, its just HP's overpriced ink scam that doesn't.

Don't bother registering it for Instaprint.

Virtually all of the points they have raised in your list are irrelevant.

Re: HP Envy 600e (6032) won't connect to BT wifi

Anne1536 — Tue, 28 May 2024 20:12:32 GMT

I think you missed the point that I now can't connect too wifi or ethernet.

The Instaprint would be another step.

Re: HP Envy 600e (6032) won't connect to BT wifi

licquorice — Tue, 28 May 2024 20:19:30 GMT

Your original post said that it worked.

I tried to set up the new printer yesterday. It connected and I printed but I could not register it on Instaprint

Factory reset it and start again.

Re: HP Envy 600e (6032) won't connect to BT wifi

Anonymous — Tue, 28 May 2024 20:21:34 GMT

@Anne1536wrote:
I think you missed the point that I now can't connect too wifi or ethernet.

We didn't miss it, you didn't say it!

If you're seeing a different printer it would suggest that you're maybe not connected to your network?

Re: HP Envy 600e (6032) won't connect to BT wifi

Anne1536 — Tue, 28 May 2024 20:22:48 GMT

As I said , Yes it worked this morning but after the agent reset everything it won't connect via WIFI or ethernet.

Re: HP Envy 600e (6032) won't connect to BT wifi

imjolly — Tue, 28 May 2024 20:24:14 GMT

If you have the BT SH2 then you cannot split the 2.4/5ghz networks. The best idea is to go to hub manager 192.168.1.254 into address bar then go to advanced settings then wireless and turn off the 5ghz network and then try and onnect your printer once it connects to 2.4ghz WiFi and working then go back and turn 5ghzwifi back on. Hub should now stay connected

Re: HP Envy 600e (6032) won't connect to BT wifi

licquorice — Tue, 28 May 2024 20:35:47 GMT

@Anne1536 wrote:

As I said , Yes it worked this morning but after the agent reset everything it won't connect via WIFI or ethernet.

You didn't mention it not working after the agent tinkered with it. Which agent, BT or HP.

Either way factory reset the printer and set it up again.

If the agent tinkered with it, it must have been connected or they wouldn't have been able to access it.

Having said that, I can't see how the agent could have accessed the printer if you hadn't set up port forwarding for the ports mentioned in item6 of your list.

Re: HP Envy 600e (6032) won't connect to BT wifi

Anne1536 — Tue, 28 May 2024 20:39:56 GMT

Sorry I wasn't clear.

It was a HP agent. They connected with, and then remote controlled, my computer. At that point it was connected to the home WIFI. The home WIFI works with an iMac, laptop and 4 different phones.
When they had reset everything I cannot connect the printer to the WIFI and if I try the ethernet route it comes up with this different printer. I can't get delete this printer. If I hide it, it just pops again.

As I said I have never tangled with router hubs or BT. And the instructions they gave me to ask BT make no sense ti me.

Re: HP Envy 600e (6032) won't connect to BT wifi

Crimliar — Tue, 28 May 2024 20:40:40 GMT

As has been previously mentioned HPs Instant ink is a real expensive! I've a HP ink tank printer, I print loads of stuff in color, it printed around 8,000 sheets on the first set of ink bottles over a 4 year period!

HP drivers can be a nightmare though! If you are using HP Smart, you not only need to reset the printer, but you then need to delete the printer from the app too and follow the setup routine like a pedant. It's also usually easier to set up the printer using the app on your phone and then add to Windows or Mac using their app - and give it time.

Re: HP Envy 600e (6032) won't connect to BT wifi

licquorice — Tue, 28 May 2024 20:42:49 GMT

OMG, you let an HP agent control your computer!!!

Obviously we have no idea what they did but try the factory reset of the printer and set it up again.

To restore the printer to the original factory defaults
1. Lift the cartridge access door to expose the cartridge area.
2. While the cartridge access door is open, press and hold (the Power button) and Wireless button
on the back of the printer for three seconds.

Re: HP Envy 600e (6032) won't connect to BT wifi

Anne1536 — Tue, 28 May 2024 20:56:33 GMT

Hey folks, you are talking to someone who just uses a printer for domestic use. And is not a tecchie.
My old HP printer cartridges were so expensive that the 100p pm (my av use now) was cheaper. Then my printer failed so I bought this one.

Was having a HP agent access my computer tottery and trying to get it running so bad? Please tell me why not.

I've some tips for tomorrow but any other I'll try. Be kind, think I could be your Mum or grandmother asking for help.

Re: HP Envy 600e (6032) won't connect to BT wifi

licquorice — Tue, 28 May 2024 21:07:49 GMT

@Anne1536 wrote:

Was having a HP agent access my computer tottery and trying to get it running so bad? Please tell me why not.

Well it was working before they tinkered with it. It really isn't a good idea to let a complete stranger have access to your computer in any case.

I've some tips for tomorrow but any other I'll try. Be kind, think I could be your Mum or grandmother asking for help.

Try the factory reset of the printer, you had it working once. As my mum would be 108 and my grandmother 133 I don't think so! 😁😁 but know what you mean.

Re: HP Envy 600e (6032) won't connect to BT wifi

Anne1536 — Tue, 28 May 2024 21:11:05 GMT

Will try tomorrow. Thanks

Re: HP Envy 600e (6032) won't connect to BT wifi

licquorice — Tue, 28 May 2024 21:14:18 GMT

The Cartridge Shop is a good source of cheap ink, either genuine cartridges or own brand.

https://www.cartridgeshop.co.uk/Ink

Re: HP Envy 600e (6032) won't connect to BT wifi

Anne1536 — Wed, 29 May 2024 09:35:35 GMT

licourice

"Obviously we have no idea what they did but try the factory reset of the printer and set it up again.

The agent did a factory reset. I've just tried what you suggested. There is a white light and it did not go off when I pressed both buttons for three seconds.

Re: HP Envy 600e (6032) won't connect to BT wifi

Anne1536 — Wed, 29 May 2024 09:45:14 GMT

imjolly

"If you have the BT SH2 then you cannot split the 2.4/5ghz networks. The best idea is to go to hub manager 192.168.1.254 into address bar then go to advanced settings then wireless and turn off the 5ghz network and then try and onnect your printer once it connects to 2.4ghz WiFi and working then go back and turn 5ghzwifi back on. Hub should now stay connected".

Tried that. HP Smart still could not find the printer. The white light on the printer did not change.

Re: HP Envy 600e (6032) won't connect to BT wifi

Anne1536 — Wed, 29 May 2024 09:50:04 GMT

Crimliar

"you not only need to reset the printer, but you then need to delete the printer from the app too and follow the setup routine like a pedant. It's also usually easier to set up the printer using the app on your phone and then add to Windows or Mac using their app - and give it time."

Tried to reset pressing both buttons -nothing happened. The white light did not go off.
The printer 6200 with a different serial number cannot be moved from the app. It is there under hard wired. If I try with WIFI then app on the iMac will not find the printer.
I have tried many times with my phone - it searches for the printer but does not find it.

Re: HP Envy 600e (6032) won't connect to BT wifi

licquorice — Wed, 29 May 2024 10:05:42 GMT

Presumably you had no problems setting it up in the first instance, just that you were unable to register for Instaprint.

Make sure you have deleted your old printer from your devices.

Re: HP Envy 600e (6032) won't connect to BT wifi

Anne1536 — Wed, 29 May 2024 10:08:46 GMT

I don't know how I managed it yesterday. But everything I've tried has not worked.

Unplugged it. Tried the two buttons. Now have a purple light. Tried with iMac and phone on WIFI and they don't find the printer. Tried wirth ethernet and the wrong printer comes up and I can't delete it and try again.