This topic

Printer connection

Juliefoley72 — Mon, 25 Sep 2023 12:29:08 GMT

Hi.

I recently upgraded to BT Halo 3 and now my HP Deskjet 2700e printer won't connect.

HP have confirmed it's a network connection problem and to contact my provider.

I am using the HP Smart Service App on an android phone for wireless connection.

The printer is paired to my network but not connecting.

Please can you help.

Thank you

Julie

Re: Printer connection

NeilO — Mon, 25 Sep 2023 14:14:19 GMT

Hi @Juliefoley72 welcome to the community and thanks for posting. Some printers can't differentiate between the 2.4 and 5Ghz Wifi channels. I'd recommend logging into the Hub Manager and temporarily turning off the 5 GHz channel. Then follow the steps to connect your printer, once its connected go back to the Hub manager to enable the 5GHz channel again.

Open a new web browser
Type 192.168.1.254 into the address bar
Click Advanced Settings and log in using the Admin details on the back of your Hub.

Thanks

Neil

Re: Printer connection

gg30340 — Mon, 25 Sep 2023 16:14:08 GMT

Did you reset your printer and log it onto your BT hub.

Alternatively if you received a new BT hub and you have installed that you could go into the hubs settings and change its SSID (name) and password to the same as your old hub and your printer and other wireless device would be none the wiser and just connect to the new hub "thinking" it is the old hub.

Re: Printer connection

Juliefoley72 — Fri, 29 Sep 2023 16:56:18 GMT

Thank you, all sorted.

Re: Printer connection

Llinos — Thu, 25 Jun 2026 12:41:32 GMT

Hi is it necessary to switch back to the 5 GHz and what happens if there is a power cut will I need to do all of this again

Re: Printer connection

gg30340 — Thu, 25 Jun 2026 12:51:27 GMT

@Llinoswrote:
Hi is it necessary to switch back to the 5 GHz and what happens if there is a power cut will I need to do all of this again

No. A power cut will not reset it.

A power cut is just like turning off a device.

You should however turn on the 5GHz after your devices has made the connection on 2.4GHz. Again if you do this it will not need re-done after a power cut.

Re: Printer connection

Llinos — Thu, 25 Jun 2026 14:06:18 GMT

No luck with the fix I'm afraid all my other devices have automatically connected using the 2.4

I have tried everything the printer brings the hub up just will.not connect either using the password or the hub button. It's getting above my pay grade now! I'm not completely stupid but cannot think of anything else to try

Re: Printer connection

licquorice — Thu, 25 Jun 2026 14:12:53 GMT

You have just dived in to a 3 year old post and haven't explained what your problem actually is, what you tried, whether the printer is new, whether the hub is new etc etc. A bit more detail might give us a clue.

Re: Printer connection

Llinos — Thu, 25 Jun 2026 17:09:15 GMT

The printer is an old printer HP 8610 office jet pro. I have successfully connected it to previous hubs no problem. I was sent a new hub because the other one stopped working after the thunderstorm.

The new hub is 5 GHz I have checked on the app and my HP computer my mobile and two Alex a speakers are connected with 2.5 GHz

The printer shows the hub but will not connect with the password or the button on the hub.

Re: Printer connection

licquorice — Thu, 25 Jun 2026 17:22:36 GMT

The new hub is dual band, 5Ghz and 2.4Ghz. If the printer can see the hub, the problem is not band related. Try a factory reset of the printer and set it up from scratch.

Re: Printer connection

gg30340 — Thu, 25 Jun 2026 18:48:32 GMT

Change the SSiD (name) and password on the "new" hub to the same as the "old" hub that you had and your printer will most likely just connect to it as will all your other devices unless you have deleted the "old" hubs connection from them in which case you will need to re connect them.