ADSL2+ on a Loooong Line - DAY 1

[imjolly]

with your attenuation dropping by 2db maybe you have had a 'lift & shift' and got a better connection   with your long line adsl2 doesn't really matter and more importatnt is you seem to have a better faster conenction

[KevG123]

Yeah, my BT order has dissappeared from My BT page so I guess thats it

Really wanted to try it ...

[KevG123]

do you recommend I give it til midnight tonite to see if original order is implemented?

How does this work then?

The mods put an order in for ADSL2+

Then someone decides not to fulfil the order?

Dont get me wrong, pleased to see my increase in speed, just want to undertand the process

[imjolly]

you can wait until tomorrow to see if any change in connection if not you can go back to mods.  or you can just settle for speed increase as I doubt adsl2 will give anymore and does bring a more aggressive system on any noise on your connection

[KevG123]

I just noticed that interleaving is now on so will want to get that changed back to fast

Need the lower ping rate for gaming

[john46]

that is because you line is unstable the next thing that will happen if interleaving does not stabilise your line is a noise margin increase and a reduction of connection speed

[KevG123]

Can we just summarise so I fully understand

Mod put an order in for ADSL2+ at my recently 21cn wbc upgraded exchange - friday being the day

Friday morning my stats showed me I was now on a different piece of kit - Infineon. Was Alcatel before

My attenuation dropped and my download speed increased from 720k to 1.2Mbs which is great

But whilst I'm on WBC I'm definatley not ADSL2+

I understand to get ADSL2+ is a physical move - so is that in addition to moving to WBC kit?

Also, even if my line 'doesn't support ADSL2+' if its a physical move there's no cct actually deciding if you can have ADSL2+ or not

Did someone at the exchange just decide my line was rubbish so they didn't fulfil the order and moved me to WBC but stopped short of ADSL2+ connection?

Sorry about all the questions, just would like to understand this

thx

[john46]

could you please post your full hub stats please then we can advise more

[KevG123]

Down Up

Rate:	1440 kbs	448 kbs
Max Rate:	1332 kbs	496 kbs
Noise Margin:	6.0 dB	8.0 dB
Attenuation:	63.0 dB	31.5 dB
Output Power:	16.2 dBm	12.4 dBm
Protocol:	G.DMT Annex A
Channel:	Interleaved
DSLAM Vendor Information	Country: {46336} Vendor: {IFTN} Specific: {48753 }
ATM PVC:	0/38
Rate Cap:	1332 kbs
Attenuation @ 300kHz:	63.0 dB
Uncanceled Echo:	-13.3 dB	Ok
VCXO Frequency Offset:	17.7 ppm	Ok
Final Receive Gain:	34.5 dB	Ok
Excessive Impulse Noise:	0	Ok

[KevG123]

Best Effort Test: -provides background information.

	Download  Speed
	1.15 Mbps

0 Mbps

2 Mbps Max Achievable Speed

 Download speedachieved during the test was - 1.15 Mbps
 For your connection, the acceptable range of speeds is 0.8 Mbps-2 Mbps.
 IP Profile for your line is - 1.27 Mbps

2. Upstream Test: -provides background information.

	Upload Speed
	0.31 Mbps

0 Mbps

0.45 Mbps Max Achievable Speed

Upload speed achieved during the test was - 0.31Mbps
 Additional Information:
 Upstream Rate IP profile on your line is - 0.45 Mbps