Thanks, Keith, I'll give that a go and report back.
Thanks again!
Can you make sure that your laptop`s wireless network settings are configured to get its settings automatically, and you have not manually configured them, as BT Wifi uses a private address range starting withe 10.xxx.xxx.xxx and not 192.168.1.xx.
If it is set to a static IP address, or you have something else like a firewall which is blocking that range, then you will not get a connection.
I am wondering if you have any additional firewalls installed, or whether the Windows 10 firewall setting for a public network is configured incorrectly?
You can in fact reset the Windows firewall to default settings, which may help.
It still looks like an issue with the laptop, and I suspect its blocking the 10.xxx.xxx.xxx subnet, or you have configured a static IP address on the wireless network.
How do I check this, Keith?
Is this the 'Proxy' setting? I have the automatic Proxy setting as 'on' and the manual Proxy setting as 'off'.
When I connect via BT Wi-fi, I get an IPv4 address as 100.xx.xxx.xxx
Is this correct?
Thanks, Keith.
Its not the proxy setting, its the IP address.
100.xx.xxx.xxx is not correct it should be from 10.0.0.0 to 10.255.255.255
The range you are getting is a special range which is only used on mobile broadband connections.
A special range 100.64.0.0 to 100.127.255.255 with a 255.192.0.0 or /10 network mask; this subnet is recommended according to rfc6598 for use as an address pool for CGN (Carrier-Grade NAT) used on mobile networks.
That seems to indicate that you are not actually connecting to BT Wifi, but to a signal transmitted by a mobile hotspot, or a 4G BT Mini hub.
Either that, or your computer is double NATing your connection.
As you can see, its the IPv4 address range that your computer is getting, which is the issue.
As to what is causing this, its not possible for me to determine that from here.
Are you sure you are not using a VPN, as that will cause the same problem?
Interesting.....
I can connect to the BTWi-fi service with no problem from my Samsung mobile and gets the BT Wi-fi logon screen .....IPv4 address is 100.89.xxx.xxx.
My husband's Windows laptop connects to the BT BTWi-fi service and gets the BT Wi-fi logon screen - IPv4 address is 100.89.xxx.xxx.
My laptop connects to the BT BTWi-fi service but does not get BT Wi-fi logon screen - IPv4 address is also 100.89.xxx.xxx.
So this points again to my laptop.
I do not have any VPNs but one was set up from my laptop for work (now deleted ), so I will see if I can get in touch with the IT Services team who set it up to see if they changed any settings.
Thanks again, Keith.
That is interesting, as the last time I looked at BT Wifi it used the 10 subnet. That was a long time ago now.
I do know there were issues with people who needed to change the subnet on the home hubs to avoid a clash with their works VPN, and the 10 subnet was reserved on the home hubs, so it was not possible for them to use it.
Based on what you have said, I assume that BT have changed the private address range for BT Wifi, to overcome this issue, as the 100 subnet would not be used within an organisation.
That is something I will have to remember for the future, but I wonder if BT have updated the configuration file on some of the older home hubs?
As for the reason that your laptop will not connect, I think its going to have to be investigated by your IT services team, as I cannot really suggest anything else.
Keith
Just to close the loop, with some guidance from a local IT services supplier, I re-installed the wi-fi adapter on my laptop and everything sparked into life 🙂 :-).
I'm hoping to try it later in a different venue - so fingers crossed.
Thanks so much for all your assistance.
That does sound hopeful 😀