Forum Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
sib4897
Aspiring Contributor

on ‎31-07-2016 15h07

1,584 Views
Message 31 of 40

Re: BT 900 Dongle works but then disables itself after a period of time

Sounds like a Hub related issue, my problem only appeared when I upgraded to the Smart Hub, I assume you're using a different Hub?
0 Ratings
delboy-lee
Contributor

on ‎31-07-2016 15h53

1,573 Views
Message 32 of 40

Re: BT 900 Dongle works but then disables itself after a period of time

I have used the BT 900 with HH5 and now HH6 with no issues & also using Windows 10 normal drivers so must be lucky not to have the issues mentioned on here.

0 Ratings
delboy-lee
Contributor

on ‎31-07-2016 16h57

1,560 Views
Message 33 of 40

Re: BT 900 Dongle works but then disables itself after a period of time

Just checked my BT 802 11ac Device Driver details as follows:

Driver Version 6.32.145.11 31/12/2014

Assume this comes via Windows 10 Auto updates. Hope this helps.
0 Ratings
sib4897
Aspiring Contributor

on ‎31-07-2016 18h21

1,543 Views
Message 34 of 40

Re: BT 900 Dongle works but then disables itself after a period of time

Mine is indicated as
BT Dual-Band Wi-Fi Dongle
Driver Version 5.100.68.48 19/04/2011
Indicates Driver Up To Date
0 Ratings
delboy-lee
Contributor

on ‎31-07-2016 19h42

1,531 Views
Message 35 of 40

Re: BT 900 Dongle works but then disables itself after a period of time

Definitely a difference in our Driver Software ? But why yours is stating Driver Up To Date is interesting ? Do you allow Windows 10 to Auto update like mine ?
0 Ratings
sib4897
Aspiring Contributor

‎31-07-2016 22h04 - edited ‎31-07-2016 22h05

1,516 Views
Message 36 of 40

Re: BT 900 Dongle works but then disables itself after a period of time

Yes Windows 10 is set to allow Auto updates, just to confirm my Wireless Adapter is the BT 600 and not the BT 900. I have had no disconnections whatsoever since I turned off the Power Management option yesterday so I'm pleased it's running OK now and hope it helps anyone else who may wish to try this fix.

0 Ratings
sib4897
Aspiring Contributor

on ‎01-08-2016 22h02

1,487 Views
Message 37 of 40

Re: BT 900 Dongle works but then disables itself after a period of time

Oh well, it's back to the drawing board, that fix lasted two days but it has now disconnected itself and required me to unplug from the usb port and plug back to reconnect!
0 Ratings
Dongleman
Beginner

on ‎02-08-2016 3h23

1,480 Views
Message 38 of 40

Re: BT 900 Dongle works but then disables itself after a period of time

Hello again,

                  Just wondering, has anyone tried my 'not plugging in the dongle until a couple of minutes after boot up' with any success? It's still working for me after about three days.

0 Ratings
sib4897
Aspiring Contributor

on ‎02-08-2016 13h43

1,463 Views
Message 39 of 40

Re: BT 900 Dongle works but then disables itself after a period of time

Was trying to keep using the BT 600 adapter with the BT hub, I've now given up on it, just replaced it with a TPL 150Mbps Wireless N USB Adapter TL-WN727NTPL that I had lying around, all working OK, touch wood that's the end of the problem!
0 Ratings
neversee60again
Aspiring Contributor

on ‎07-09-2016 9h04

1,307 Views
Message 40 of 40

Re: BT 900 Dongle works but then disables itself after a period of time

The trouble is that there have been so many changes to Windows 10 in the last few months around the time that I started using the Smart Hub that I could not say definitely that it was the Hub that caused the problem.
0 Ratings