I have a question here for anyone interested in ancient history, with a long memory, or maybe even still running this discontinued hardware (I have no need for fast download speeds etc and it works fine for me!).
I have the 1 extender + 2 hotspot kit set up in my house, and I have recently obtained a further 2 hotspots that I would like to install to increase Wi-Fi coverage, as the BT technical literature says that it is possible to add additional hotspots.
The problem is as follows:
1. As I understand it, you can only have one extender per ring main which means the additional hotspots would be controlled by the original set's extender.
2. When I do the standard setup procedure for the new hotspots ('aliens'), the latter are not recognised on the devices I'm trying to connect.
3. I have also tried the Wi-Fi cloning optional feature and although it shows a 100% signal strength, I also get a 'no internet connection' message.
So is it actually possible to add a hotspot from a different set? If so is this done by changing the alien's network name and wireless key etc. to make it the same as that of the original installed set? If yes -how, or is it done in some other way?
Please note, the following link, which seems to appear in answers to most previous questions on this topic, was NOT of any help! : http://bt.custhelp.com/app/answers/detail/a_id/50181/~/mini-wi-fi-home-hotspot-500.
Any assistance will be much appreciated.
It should be possible to add further hotspots. I currently have the same setup as you but haven't tried adding further hotspots. As you say, you can only have one extender connected to the hub but that should feed multiple hotspots. The wifi side of things is totally independent of network name etc, both my hotspots have different names and passwords to each other and the hub. I logged in to each hotspot and changed the wifi name and password manually.
I have changed the IP address of my hotspots so access them directly by just inputting the IP address in the address bar of my browser but you can try the method described here if you don't know the IP addresses.
I presume you bought the extra hotspots secondhand rather than new, if so, did you factory reset them first before trying to connect them? If not, you could try doing that.
Tried the factory reset, but this did not work.
Would it help if I send a screenshot of the router ethernet connections by private message (if that is possible)? None of the MAC addresses on the latter tie up with those printed on the back of the extender or hotspots.
One of the reasons I set static IP addresses on my hotspots is that they don't show up in the hub manager and that way I would know what the addresses were without having to rely on identifying them in the hub manager. I think the default address is 192.168.1.1 after a factory reset and before connecting to the hub and getting a DHCP allocated address. However, all this is not really relevant to why the extra hotspots aren't connecting.
Have you tried temporarily switching off the existing hotspots whilst connecting the new ones?
Do the Ethernet ports work on the hotspots?
It's perfectly possible to add extra hotspots to your existing setup, and you can have more than one kit on the same ring circuit.
It sounds as though you have already tried a few F.Resets and Pairing procedures, so it may be best to factory reset everything and try pairing the new hotspots - as it could be that pairing has got all muddled up.
If possible, it's best to try and F.Reset/Pair all the adaptor in the same room (to allow for easy viewing of the LED indicators).
On your existing Kit,
On your 2 new hotspots,
Hope this helps get you back up and running