Broadband activated but no connection

[leahs98]

Hello,

Today (25/08/2020), was my activation day. I received texts from both digital voice and broadband to confirm that activation had taken place and access is now available. When turning on the smart hub 2 after the green light a orange light shows which means there’s no connection to the internet. When trying to connect devices it says we should troubleshoot. Does anyone have any resolutions? 

[imjolly]

Normally I would ask you to check for dial tone but with digital voice if no internet then no dial tone

have you tried connecting hub to test socket with a filter assuming your have FTTC

[leahs98]

just checked - I can’t find the test socket. Only been living in this apartment for a few days and it’s a new building. 

[imjolly]

Do you have FTTC or FTTP?

if FTTC then you will need to connect to master socket which probably has 2 outlets - fibre and phone. If FTTP you have something like this

[leahs98]

I believe it is FTTP

[Keith_Beddoe]

---

@leahs98 wrote:

I believe it is FTTP

---

What lights are showing on the Openreach optical box?

Is the smart hub 2 connected to it as shown below?

[leahs98]

We followed the steps on the handout (diagram) 

[Keith_Beddoe]

Do you have the special digital voice phones provided by BT, or do you have your own phone?

Your own phone would need to plug into the phone socket on the smart hub 2.

If you still have no service, then call the FTTP helpdesk  on 0800 587 4787, they should  be able to help.

[leahs98]

Got a digital voice phone. Got an engineer coming out tomorrow so let’s hope they get it sorted 

[Keith_Beddoe]

---

@leahs98 wrote:

Got a digital voice phone. Got an engineer coming out tomorrow so let’s hope they get it sorted 

---

From your picture I cannot see any alarms on the ONT, so its most likely just a configuration issue, or they have got the wrong serial number for your ONT.