FTTC DLM

[Octopus16]

Hello everyone. I used to be with Sky broadband on the 38mb/s tier. I used to get 33 mb/s.

My line with BT up to 52 mb/s was *just* activated and I am getting speeds of 21 mb/s. Will this slowly go up to 33 mb/s during the first 10 days of service? Thanks.

[imjolly]

Can you post hub stats if hh6 then advanced settings then technical log information 

enter phone number and post results remember delete number but leave exchange and cab 

https://www.dslchecker.bt.com/adsl/adslchecker.welcome

[Octopus16]

BT Speed Test

Sky this morning on the same line, same socket etc.

Product name:

BT Hub 6A

Serial number:

+084316+NQ94590721

Firmware version:

SG4B1000E01E

Firmware updated:

01-Jan-0001

Board version:

1.0

Gui version:

1.105.0

DSL uptime:

0 Days, 4 Hours 13 Minutes 53 Seconds

Data rate:

6.04 Mbps / 23.26 Mbps

Maximum data rate:

6042 / 26388

Noise margin:

6.1 dB / 5.8 dB

Line attenuation:

26 dB

Signal attenuation:

0 dB / 26 dB

VPI / VCI:

0/38

Modulation:

G_993_2_ANNEX_B

Latency type:

Fast Path

Data sent / received:

663 MB Uploaded / 4087 MB Downloaded

Broadband username:

bthomehub@btbroadband.com

BT Wi-fi:

Not active

2.4 GHz wireless network name:

BTHub6-7P9H

2.4 GHz wireless channel:

Smart (Channel 11)

5 GHz wireless network name:

BTHub6-7P9H

5 GHz wireless channel:

Smart (Channel 36)

Wireless security:

WPA2 (Recommended)

Wireless mode:

Mode 1

Firewall:

On

MAC address:

5C:B1:3E:16:4A:1B

Software variant:

-

Boot loader:

0.48.8-sec

 

[imjolly]

Which exchange and cab. You deleted from dslchecker results

[Octopus16]

Peterston-Super-Ely exchange

Cabinet 3

[imjolly · Accepted solution]

If you can maintain a stable connection 24/7 for 7/10 days the DLM should activate G.INP which should lower noise margin and give you an increase in connection speed

[Octopus16]

Thanks for your help!