Whats the easiest way to see if your cabinet has been G.INP enabled?
from previous posts you are on Newton Mearns Cab 20 which is Huawei type and as far I am aware all Huawei cabs have been G.INP enabled
Unless it was enabled in the last few days?
I currently have my HH5a on waiting on the update. Last time i had the 612 on was just over a week and it said it was not enabled?
I sure there is a post which said that all Huawei cabs were G.INP enabled but not ECI hence why the rollout of the upgraded firmware to the HH5a
|3. Firmware version:|
Software version 126.96.36.199.188.8.131.52.11 (Type A) Last updated 24/06/15
Well my Firmware seems to have been updated but no change to line stats? Worth a reboot or just hang on?
your connection probably reset when you got the firmware update - mines did. up to you if been stable since 24/6 then 1 reset wont hurt
Done and no changes. Looks like i will just have to wait a little longer.
Going of btretails sister isp (plusnet) forum:*
All the Huawei street boxes have the first version of retransmisson.
As for the ducktape/chewing gum second version:
"As of 9/10 June, they had migrated 935k lines over to the new profile. They can do 50-60k lines a day and there are some 4.5 million Huawei lines" (plusnet forum post)
Lots to work through then 😄
The eci street box users will be lucky if anything happens this side of new year. (Apart from the trail area's )
I keep reading that all Huawei cabinets have G.INP on by default, but this doesn't seem to be the case with Huawei cab we're connected to (commissioned a few weeks ago) - well, INP doesn't appear to be active in the router's stats (Billion 8800NL with latest firmware):
Here's an example of stats where G.INP are enabled.