I've been having issues with my Humax Youview box supplied with BT, and I was wondering if anybody have had similar issues recently.
Essentially we've had BT YouView for over a year now. Our first Humax box broke down (separate issue) and was replaced. The replacement box worked great until about 6 weeks ago, when we started having issues. It first started with the occassional 'Content protection error', especially when watching internet channels. Now since then, when bringing the box out of standby with get the Humax loading screen, but then the input to the TV gets lost, with either 'No signal detected' or 'This resolution is not supported' displayed by the TV. If we don't get those messages, we instead get a purple screen. Changing the HDMI cable doesn't fix it, nor doing a reset to factory settings. Just to be sure we've tried the box on a newer TV with the same problem. Therefore the box is definitely at fault, and looking on the internet it looks like a HDMI communication problem.
Now this is where it gets frustrating. I've had two BT engineers come out to sort this. The first one just unplugged everything, and plugged it back in. This fixed the issue for a day before we had the purple screen again. Yesterday a different engineer came out, and just plugged the TV into the Humax box via SCART cable. As expected, the box works fine now confirming that it's a HDMI issue. The BT engineer said that in the last month 'a lot of people' have had this issue and it's due to a software fault that BT are trying to fix. When I asked when would it be fixed, the engineer said he didn't know and it could be months. Worst of all he said I wouldn't be informed when it'll be fixed and that I had to keep checking the HDMI connection every so often so see if it works.
I have a working box, but I find it quite annoying that I can't watch anything in HD when I'm paying for an HD box. Has anybody else experienced the same sort of issue in the last few weeks, and has anybody also been told this story about a software glitch being the issue? I ask because there's no point in having time off work to let an engineer in if he's only going to tell me the same thing and not fix thebox.
I am so glad I am not the only one having this problem!! Was going to report it to BT but thought I would check on here first.
I keep having to do hard resets of my set top box as it just 'locks up' have sound but no picture and the box won't respond. Had the purple screen about a week agao also but this appears to have stopped (for the time being).
Having to do a hard reset 3-4 times a day is very frustrating especially for something that was working perfectly fine just a couple of weeks ago!
This seems to be a common issue with that box. A quick google suggests that it might be time to get it replaced and let the original box die an untimely death
I got two boxes with this issue, its not software its a hardware issue. Both boxes are no longer in use, they still work with the scart though. So I just went and brought two new G4 boxes to replace them.