cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Beginner
417 Views
Message 11 of 14

Re: Help moving from ADSL MAX to ADSL2+ and enabling fast path

Go to solution

Hi Again,

 

Everything looks good:

 

DSL Status:UP
DSL Modulation Mode:G.992.5 (ADSL2+)
DSL Path Mode:FAST
Downstream Rate:3802 Kbps
Upstream Rate:816 Kbps
Downstream Margin:6 db
Upstream Margin:6 db
Downstream Line Attenuation:58
Upstream Line Attenuation:67
Downstream Transmit Power:21
Upstream Transmit Power:12
LOS Errors:0

 

Thanks!

 

Will the line be retrainded again over the next 10 days?

0 Ratings
Distinguished Sage
Distinguished Sage
405 Views
Message 12 of 14

Re: Help moving from ADSL MAX to ADSL2+ and enabling fast path

Go to solution

I would try and avoid any resets apart from hub resetting itself as it settles 

 

down speed much the same as and big increase in upstream - as expected

 

looking good



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Beginner
390 Views
Message 13 of 14

Re: Help moving from ADSL MAX to ADSL2+ and enabling fast path

Go to solution

Had to turn the mains off to install an EV point:

 

DSL Status:UP
DSL Modulation Mode:G.992.5 (ADSL2+)
DSL Path Mode:FAST
Downstream Rate:3583 Kbps
Upstream Rate:848 Kbps
Downstream Margin:6 db
Upstream Margin:5 db
Downstream Line Attenuation:60
Upstream Line Attenuation:67
Downstream Transmit Power:21
Upstream Transmit Power:12
LOS Errors:0

 

Will the training over the next 10days recover the downstream loss?

0 Ratings
Distinguished Sage
Distinguished Sage
385 Views
Message 14 of 14

Re: Help moving from ADSL MAX to ADSL2+ and enabling fast path

Go to solution

you just have to wait and see   when you need to disconnect the hub it is better to do it from the hub manager and disconnect from there rather than just switch off



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings