cancel
Showing results for 
Search instead for 
Did you mean: 
Distinguished Sage
305 Views
Message 11 of 34

Re: Hub strange behaviour

while there is no real limit to how many devices you can have connected however using multiple devices at once may cause problems
0 Ratings
Damo86
Aspiring Contributor
300 Views
Message 12 of 34

Re: Hub strange behaviour

Well I am connected thorough a filter now if is that what youi mean

0 Ratings
Distinguished Sage
Distinguished Sage
297 Views
Message 13 of 34

Re: Hub strange behaviour

if you are now in the test socket can you post new router stats please



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Damo86
Aspiring Contributor
294 Views
Message 14 of 34

Re: Hub strange behaviour

Sorry I think I didn't quite understand what do you mean by test socket
0 Ratings
Distinguished Sage
Distinguished Sage
291 Views
Message 15 of 34

Re: Hub strange behaviour

test socket.jpg  this is the test socket behind bottom half of nte5 master



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Damo86
Aspiring Contributor
290 Views
Message 16 of 34

Re: Hub strange behaviour


Connection Information
Line state:    Connected
Connection time:    0 days, 00:02:20
Downstream:    21.31 Mbps
Upstream:    1.164 Mbps
 
ADSL Settings
VPI/VCI:    0/38
Type:    PPPoA
Modulation:    G.992.5 Annex A
Latency type:    Fast
Noise margin (Down/Up):    3.1 dB / 6.2 dB
Line attenuation (Down/Up):    12.3 dB / 7.8 dB
Output power (Down/Up):    20.0 dBm / 12.1 dBm
FEC Events (Down/Up):    0 / 0
CRC Events (Down/Up):    0 / 0
Loss of Framing (Local/Remote):    0 / 0
Loss of Signal (Local/Remote):    0 / 0
Loss of Power (Local/Remote):    0 / 0
HEC Events (Down/Up):    0 / 0
Error Seconds (Local/Remote):    44 / 0

 

There is a red cable cut there it looks a bit messy, do you know what is it for,

0 Ratings
Damo86
Aspiring Contributor
288 Views
Message 17 of 34

Re: Hub strange behaviour

Now it changed a bit

 

Line state:    Connected
Connection time:    0 days, 00:06:54
Downstream:    21.31 Mbps
Upstream:    1.164 Mbps
 
ADSL Settings
VPI/VCI:    0/38
Type:    PPPoA
Modulation:    G.992.5 Annex A
Latency type:    Fast
Noise margin (Down/Up):    3.0 dB / 6.2 dB
Line attenuation (Down/Up):    12.3 dB / 7.8 dB
Output power (Down/Up):    20.0 dBm / 12.1 dBm
FEC Events (Down/Up):    0 / 0
CRC Events (Down/Up):    1 / 0
Loss of Framing (Local/Remote):    0 / 0
Loss of Signal (Local/Remote):    0 / 0
Loss of Power (Local/Remote):    0 / 0
HEC Events (Down/Up):    3 / 0
Error Seconds (Local/Remote):    45 / 0

0 Ratings
Distinguished Sage
Distinguished Sage
276 Views
Message 18 of 34

Re: Hub strange behaviour

your stats look good with few errors.

 

I have tried to find a previous post with a problem similar to yours as I am sure CL Keith suggested a solution



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Distinguished Sage
271 Views
Message 19 of 34

Re: Hub strange behaviour

"There is a red cable cut there it looks a bit messy, do you know what is it for,"

 

not  sure what you mean by a red  cable 

0 Ratings
Highlighted
Damo86
Aspiring Contributor
268 Views
Message 20 of 34

Re: Hub strange behaviour

I was reading a post where another guy had an issue not sure if its the one you're saying. but this guy had to reset hub every 4 days or so..then this keith said that this could be due to router overloading while using wifi..

 

and John, yeah just like the one going into the little terminal, but red colour,its just loose. I guess if my phone and router  works then that's fine. I took a few pics of the socket, if you are interested to see them I can put them on..

 

Thanks!

0 Ratings