cancel
Showing results for 
Search instead for 
Did you mean: 
kevinpwc
Beginner
258 Views
Message 1 of 2

IP Phone

Hi

I have a home hub 2 which had a firmware upgrade to v8.1.H.U (Type A) applied on 19/8/11. Since then I've not been able to use the normal telephone line (green socket). How do I revert back to the earlier firmware version?

I have a BT home hub 2 to which I have connected a polycom phone using the green socket at the back of the home hub to make IP calls. The hub firmware was upgraded on 19/8/11 to V 8.1.H.U (Type A) since that upgrade the external phone (green socket) has stopped working. I have a BT wireless phone, which was supplied with the hub, that I can also use to make IP calls, this is working ok.

0 Ratings
1 REPLY 1
Distinguished Guru
247 Views
Message 2 of 2

Re: IP Phone

Hi

If you are trying to use an IP phone into the green socket it will not work as that is where you would plug a standard PSTN phone.

In order for an IP phone to work you will need to plug it into one of the yellow sockets.

(If I have helped you in any way please click the thumbs up. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.
0 Ratings