cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Distinguished Sage
Distinguished Sage
476 Views
Message 101 of 104

Re: IP Profile and broadband speed keeps dropping

really strange as the second diagram looks fine and everything should work as before.  did you try changing the filter in the NTE5 for another?

 

did you check the stats from the hub when connected directly via filter to the master before you reverted back to previous setup?



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Highlighted
Contributor
471 Views
Message 102 of 104

Re: IP Profile and broadband speed keeps dropping

No I did'nt do either. Will let things sit for a few days and get a set of stats with another filter. 

0 Ratings
Highlighted
Distinguished Sage
Distinguished Sage
467 Views
Message 103 of 104

Re: IP Profile and broadband speed keeps dropping

probably best wait as you suggest rather than another reset



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Highlighted
Contributor
437 Views
Message 104 of 104

Re: IP Profile and broadband speed keeps dropping

Have been running on the following set up for 5 days without disconnection:-

 

SET UP 1

CIMG0003.JPG

 

Stats & speed have remained much the same:-

Download speed 2254Kbps-2274Kbps; IP Profile 2500Kbps; Connection speed 3.250Mbps;

Noise Margin 10.7dB-11.04dB; Line Attenuation 51.6/30.5 Db; Power 18.8/12.4dBs

 

This morning I powered down the hub and changed my set up to the following using a different filter as recommended.

 

 SET UP 2

CIMG0009.JPG

 

Once again my home landline would not ring with the filter connected to the master socket and the phone connected to the filter.  Again the Phone will ring if directly connected to the master socket, but not through the filter.

 

A summary of the Hub Stats are as follows:-

 

Test   Time     Date       Connection time    Downstream     Upstream      Noise margin      Line attenuation           power

 

.                                                                    (Mbps)             (Kbps)         dB(down/up)        dB(down/up)          dBm(down/up)

1       11:43    13/9/11       5days:00:25       3.250               448               10.9 /16              51.6/30.5             18.8/12.4

2       12:15   13/9/11        0days:00:03       3.375               448               12.1/16               51.4/30.5              19/12.5

3       12:40   13/9/11        0days:00:16       3.156               448               11.5/16               51.5/30.5              18.8/12.5

 

Test 1 is with SET UP 1,

Test 2 with SET UP 2 

Test 3 back to SET UP 1. (since phone will not ring/work)

 

0 Ratings