So, I ordered Infinity2 and was connected on 26th Feb waited the 10 days for my line to settle all the while the speed was between 40-48mb.
I got in touch with the online help on 9th March, and after half an hour of doing tests on both ends apparently, an engineer was booked to turn up for this morning...which i was waiting all day for to find out that they have cancelled.
ive tried going back to the help to just be told to do the exact same things. I dont see why they would cancel the engineer and not inform me. Meanwhile my 14 day period of cancelling is now over....!
This is a list of your BT Smart Hub settings and current statistics.
BT Hub 6A
+084319+NQ74572443
SG4B1000B522
05-Mar-2018
1.0
1.64.0
0 Days, 5 Hours 36 Minutes 2 Seconds
8.28 Mbps / 48.91 Mbps
8670 / 49319
6.3 dB / 6.3 dB
19.9 dB
0/38
G_993_2_ANNEX_B
Fast Path
112 MB Uploaded / 704 MB Downloaded
bthomehub@btbroadband.com
Active
BTHub6-5MP6
Smart (Channel 1)
BTHub6-5MP6
Smart (Channel 36)
WPA2 (Recommended)
Mode 1
On
D8:D7:75:89:BF:57
-
9.2.0
I am currently in the master socket, and i cannot do a quiet line test as i dont have a phone. There is only this 1 PC through ethernet and 1 Mobile through wi-fi connected.
This wouldnt be bad if i was paying for Infinity 1, but i'm not.
What speeds were quoted on your order confirmation? Even though you are paying for Infinity 2 it doesn't mean your line can support it.
Can you post the results of this link but delete your phone number first https://www.btwholesale.com/includes/adsl/main.html
i would invest £5 and buy a corded phone in order you can check line for noise and in fact you actually have a working phone line as it is possible to get broadband connection with only 1 of the 2 wires connected but speed reduced. Phone needs both connected so no dial tone shows a line problem it could save you getting charged £139 for the engineer callout
from your stats you are getting a connection speed just about your attainable speed suggesting as good as your line can handle - unless a phone shows a line problem
Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Handback Threshold(Mbps)WBC FTTC Availability DateWBC SOGEA Availability DateLeft in Jumper High Low High Low Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)WBC FTTP Availability Date ADSL ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date Left in JumperOther Offerings Availability Date Premise environmentStatus
VDSL Range A (Clean) | 78.6 | 55.3 | 20 | 18.7 | 48.9 | Available | -- | -- | |
VDSL Range B (Impacted) | 68.4 | 42.6 | 20 | 13.1 | 35 | Available | -- | -- | |
FTTP on Demand | 330 | 30 | -- | Available | -- | -- | |||
WBC ADSL 2+ | Up to 6.5 | -- | 5.5 to 7.5 | Available | -- | -- | |||
WBC ADSL 2+ Annex M | Up to 6.5 | Up to 0.5 | 5.5 to 7.5 | Available | -- | -- | |||
ADSL Max | Up to 5.5 | -- | 4.5 to 6.5 | Available | -- | -- | |||
WBC Fixed Rate | 1 | -- | -- | Available | -- | -- | |||
Fixed Rate | 1 | -- | -- | Available | -- | -- | |||
VDSL Multicast | -- | -- | -- | Available | -- | -- | |||
ADSL Multicast | -- | -- | -- | Available | -- | -- | |||
Bridge Tap | N | ||||||||
VRI | N | ||||||||
NTEFaceplate | N | ||||||||
Last Test Date | 26-02-2018 |
So if a phone shows up no fault, then its pointless me being on Infinity 2 as i cant even get Infinity 1 speeds?
a phone will help you know if there is a problem internally restricting your connection speed
with the dslchecker results I would be phoning customer services and getting engineer visit as speed below minimum acceptable
Ive bought a phone and tried the line, im not sure what im supposed to be listening for , but i couldnt hear anything 😕
if you do quiet line test all you should hear is the announcements - no hiss/crackle/background noise
I didnt notice any noise other than the talking