cancel
Showing results for 
Search instead for 
Did you mean: 
taff150
Beginner
402 Views
Message 11 of 28

Re: Low Broadband Speed

Go to solution
Just had a look. they are wired in series. There are 2 orange wires connected to terminal 3. One comes from the otside box.
0 Ratings
Distinguished Sage
Distinguished Sage
401 Views
Message 12 of 28

Re: Low Broadband Speed

Go to solution

so there are 3 wires normally white/blue and blue/white on terminals 2 & 5 and sometimes the bellwire on terminal 3.  if that is the case then normally it is suggested to remove the orange bellwire on terminal 3 on all sockets as it can cause noise on your line



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
gouledw
Recognised Expert
399 Views
Message 13 of 28

Re: Low Broadband Speed

Go to solution
You could try removing the orange bell wire from terminal 3 outside too, but I would do as IMJ suggested and do the internal ones first.
0 Ratings
taff150
Beginner
395 Views
Message 14 of 28

Re: Low Broadband Speed

Go to solution
I have disconnected the wires on terminal 3
0 Ratings
Highlighted
gouledw
Recognised Expert
392 Views
Message 15 of 28

Re: Low Broadband Speed

Go to solution
Stats any better? Can you repost them please.
0 Ratings
Distinguished Sage
Distinguished Sage
395 Views
Message 16 of 28

Re: Low Broadband Speed

Go to solution

has that made any change to your connection speed or noise margin?



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
taff150
Beginner
391 Views
Message 17 of 28

Re: Low Broadband Speed

Go to solution
thank you ihave already disconnected the bell wire on termial 3
0 Ratings
taff150
Beginner
387 Views
Message 18 of 28

Re: Low Broadband Speed

Go to solution

FAQ

Results Image not loaded

Test1 comprises of two tests

1. Best Effort Test: -provides background information.

Download Speed
640 Kbps

0 Kbps 1000 Kbps
Max Achievable Speed

Download speedachieved during the test was - 640 Kbps
For your connection, the acceptable range of speeds is 400-1000 Kbps.
Additional Information:
Your DSL Connection Rate :800 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 705 Kbps

2. Upstream Test: -provides background information.

Upload Speed
319 Kbps

0 Kbps 448 Kbps
Max Achievable Speed

>Upload speed achieved during the test was - 319 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 448 Kbps
0 Ratings
Distinguished Sage
Distinguished Sage
385 Views
Message 19 of 28

Re: Low Broadband Speed

Go to solution

disappointing as I was hoping for a change but these stats appear just as before - what about the router adsl stats



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
taff150
Beginner
379 Views
Message 20 of 28

Re: Low Broadband Speed

Go to solution
ADSL Line Status
Connection Information
Line state: Connected
Connection time: 4 days, 21:15:11
Downstream: 800 Kbps
Upstream: 448 Kbps

ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.1 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 6.2 dB / 14.0 dB
Line attenuation (Down/Up): 62.6 dB / 31.5 dB
Output power (Down/Up): 14.7 dBm / 12.6 dBm
FEC Events (Down/Up): 20320 / 4182
CRC Events (Down/Up): 170 / 235
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 656 / 173
Error Seconds (Local/Remote): 440588 / 9467
0 Ratings