I hav just re-read what you wrote, and I understand what you are saying. "apmode" is simply the default SSID I set up, and the password for it is "btcommunityforum"
I would suggest that you change the SSID and password to one of your own choosing.
If you go to the setup page at http://192.168.1.15 you can change the wireless settings to your own ones.
Thank you for keeping with me, made the adjustments as you suggested, such as password, i then saved and rebooted,This is the bit i did not pay attention to.
All is now working fine, connections are tons better, connection made in any part of the property, encluding tablet connection. Hopefully thats job done.
All the best and regards.
PS, Is there any where i can leave you feed back on the forum..
I am pleased that you got there in the end, as the effort is very worth while.
Your feedback via this thread, will encourage others to try and improve their wireless connections, that is the most important thing.
There is no other feedback mechanism apart from the normal ticking of the white star next to a posting, if you want to.
This thread seems to be quite popular, according to my webserver logs.
Just to update things, BT now have finally introduced their own fully integrated range of devices to increase wireless range, so I would recommend that people use these instead.
They do tend to be more expensive than some of the other options in this thread, but they should be simpler to set up.
I can get the device connected to my home hub 3 wifi but when I connecter to the repeater it won't provide an IP address for any device. I have DHCP disabled and the TP is set to a stactic IP of 192.168.1.253. I've tried setting the TP to dynamic address and it still won't provide an IP address for any device that connects to it. I have the DHCP server disabled on the TP. But have tried it with the DHCP server enabled then it will give a device that connects to it an IP but then I'm having DNS problems after trying four diffirent DNS servers. Any help greatly apprieciated.
Right I have changed the TP IP address to 192.168.1.89 anad enabled DCHP. Now I can connect devices but I'm having DNS problems. I've tried Google DNS, OpenDNS and BT DNS with no luck. I've tried with the default gateway set to 192.168.1.254, 184.108.40.206 and 0.0.0.0 Does anyone know what the gateway on the TP needs to be set at and if I net to put something in the Default Domain setting.
The IP address needs to be outside of the DHCP range. The Gateway address, and DNS are not needed, as you are using the home hubs DHCP to provide this. Nothing goes in the default domain.
Just use the same values as I suggested for the WA701ND.