Reverted to my Smart Hub 6

[Travelusa]

Well after a few months on my Hub 5a after the broadband crashed been stable all this time

I have decided to go back and test my hub 6a

so far ok

these are the results no 2 hr reboots

Firmware version:

SG4B10002244

Firmware updated:

08-Jan-2017

-

Board version:

1.0

Gui version:

1.32.0

DSL uptime:

0 Days, 6 Hours 24 Minutes 0 Seconds

Data rate:

20.00 kbps / 80.00 kbps

Maximum data rate:

25179 / 85536

Noise margin:

9 / 6.5

Line attenuation:

16.2

Will give feeback as time goes on

🙂

[DaveD]

Good luck with it - hope it stays stable for you 

I have also done a similar thing - I have had my HH6 back up for 2 weeks without an issue, I was beginning to wonder what all the fuss was about, now rock solid performance. {smug mode} 

Then, just one evening earlier this week, I had a return of the dreaded 'no wireless connectivity' , tested with  ethernet cable into the hub worked fine.   So rebooted, then after the hub settled down it connected on the 5 network but not the 2.4, it just did not seem to be transmitting although the status page said it was online.  Rebooted twice more over the next couple of hours - then just gave up

The next morning it was fine & has stayed up since - bizarre

[Travelusa]

So Far so Good

Results below

Could the Issues be due to BT when they are upgrading the dslams from 76 mb to 80 mb

Have noticed on other results even with the hub5a it showed 80 mb

Firmware version:

SG4B10002244

Firmware updated:

08-Jan-2017

-

Board version:

1.0

Gui version:

1.32.0

DSL uptime:

1 Days, 6 Hours 18 Minutes 14 Seconds

Data rate:

20.00 kbps / 80.00 kbps

Maximum data rate:

25179 / 85536

Noise margin:

8.8 / 6.5

Line attenuation:

16.2

Previous to this I started getting a 2 hrs resync it started my broadband to drop to 6 mb when wholesale capped it

had to get openreach out to prove the line was ok and get wholesale to reset the line ..

Thats when I changed over to the Hub5a

My Sister has also found her dauhters line had a issue with the wiring and the openreach socket

she was getting 38 mb for inf 1

discon the extn wiring put her hub5a into the test socket

line speed had gone up to 51mb

not bad for INF1  proves wiring and filters can cause issues

[Travelusa]

Another Day

Results so far no reboots

DSL uptime:

2 Days, 6 Hours 35 Minutes 25 Seconds

Data rate:

20.00 kbps / 80.00 kbps

Maximum data rate:

25179 / 85536

Noise margin:

8.8 / 6.5

Line attenuation:

16.2

[Travelusa]

Well another day without reboots

DSL uptime:

3 Days, 6 Hours 40 Minutes 34 Seconds

Data rate:

20.00 kbps / 80.00 kbps

Maximum data rate:

25179 / 85536

Noise margin:

8.9 / 6.6

Line attenuation:

16.2

Could it be have all the dlams upgrade causing the hub6 issues

Now mine has been upgraded the hub is stable

Most probably pay for that comment now with reboots

[Travelusa]

Another day without reboot

DSL uptime:

4 Days, 6 Hours 12 Minutes 43 Seconds

Data rate:

20.00 kbps / 80.00 kbps

Maximum data rate:

25179 / 85536

Noise margin:

8.9 / 6.4

Line attenuation:

16.2

[Travelusa]

Another Day no reboots

DSL uptime:

5 Days, 15 Hours 7 Minutes 37 Seconds

Data rate:

20.00 kbps / 80.00 kbps

Maximum data rate:

25179 / 85536

Noise margin:

9 / 6.6

Line attenuation:

16.2

[Travelusa]

7 Days without a reboot

DSL uptime:

7 Days, 0 Hours 9 Minutes 14 Seconds

Data rate:

20.00 kbps / 80.00 kbps

Maximum data rate:

25179 / 85536

Noise margin:

8.8 / 6.3

Line attenuation:

16.2

[Travelusa]

9 Days without a reboot

DSL uptime:

9 Days, 6 Hours 42 Minutes 38 Seconds

Data rate:

20.00 kbps / 80.00 kbps

Maximum data rate:

25179 / 85536

Noise margin:

8.9 / 6.5

Line attenuation:

16.2

[TelephoneBob]

Cool Story!