that's ok what you are trying to get is a stable connection for at least 3+ days as without stable connection any resetting of latency is pointless
ok its been a few days with a slight change but still no fast latency..
Last initialization procedure status: 0 Max: Upstream rate = 1556 Kbps, Downstream rate = 24100 Kbps Bearer: 0, Upstream rate = 828 Kbps, Downstream rate = 20991 Kbps Link Power State: L0 Mode: ADSL2+ TPS-TC: ATM Mode Trellis: U:ON /D:ON Line Status: No Defect Training Status: Showtime Down Up SNR (dB): 2.7 11.5 Attn(dB): 14.5 8.1 Pwr(dBm): 20.8 12.2 ADSL2 framing Bearer 0 MSGc: 36 24 B: 114 34 M: 1 2 T: 6 2 R: 12 16 S: 0.1751 2.6667 L: 5804 258 D: 128 8 Counters Bearer 0 SF: 15872564 363792 SFErr: 157 7 RS: 3999886125 578997 RSCorr: 97863391 16571 RSUnCorr: 514 0 Bearer 0 HEC: 270 0 OCD: 0 0 LCD: 0 0 Total Cells: 76478109 341837535 Data Cells: 1385667094 74124578 Drop Cells: 0 Bit Errors: 0 240 ES: 152 7 SES: 0 0 UAS: 0 0 AS: 175042 Bearer 0 INP: 1.00 1.50 INPRein: 0.00 0.00 delay: 6 5 PER: 11.02 20.00 OR: 30.46 12.00 AgR: 20940.56 836.73 Bitswap: 43924/43924 739/739
As you can see the latency increased to a depth of 128 now and the SNR dropped to under 3. So now will someone be able to change me back to a FAST profile.
your stats don't show any internet connection time
if interleaved depth has now increased then there is problem with your conenction so much so that DLM has increased your latency to try a stablise your conenction it may be the 2.7db noise margin is to low and needs to be higher or there are problems with your line and noise
the standard default noise margin is 6db but many adsl2 conenction have the 3db as normal giving a bit more connection speed however in some cases the lower noise margin causes instability an better going back to 6db and sacrificing a bit of connection speed for better stability
is that time system up time not internet connection time which is often lower due to drops in conenction