Trying to set my Youview remote to control my logik TV. Following the instructions using code 2117 given in the downloaded document but when I reach stage 3 (holding the remote until TV switches off) the TV doesnt switch off. Is there another code to try?
Welcome and thanks for posting. Sorry you're having problems getting the remote sorted. Take a look at How do I control my TV with my YouView remote control? Let us know if that helps.
Maybe @voice_of_reason could help?
Thanks. Those are the instructions I am following. All works until I get to step 4 where the TV doesn't switch off as expected. I am using code 2117 for Logic TV as per the list given.
After you've entered your code, the light on the remote should go solid blue. If you press 'OK' to store your code at this point, the light on the remote goes out. Then press the TV standby button to turn your TV back on (in the manual it tells you to do these two steps the other way round, which is wrong). Then everything should be working.
Yes, I realised after posting that Dimples' issue was with the TV not turning off, rather than not turning back on again. My issue was the same as yours - the TV turned off, but not back on again. The light on the remote went solid blue, and the only button it responded to was 'OK', despite the manual not making that clear. It seemed as though the remote had 'locked up'. The manual implied you should be able to turn the TV back on first before storing the changes. Maybe that works with some TVs, but it certainly didn't for me.
Sorry, I can't offer any further help I'm afraid.