Ive been trying to find out something and would need instructions if poss i want to set up either a BT HUB 2 OR 3 as a wifi extender/repeater as we live in a 3 story house and we get good signal from the middle floor up but not from the middle floor down.
So i was wondering how do i go about doing this and what sort of settings would i need apply?
If anyone can help me with my questions i would be so greatfull and would have a nagging family of my back lol even tho i love em to bits.
Many thanks for all your time and help its all greatfully appriciated.
You will need to run a cable between the two, or use powerline adapters.
Thanks very much for your quick reply i also forgot to mention that my primary would be the HH4.
Thanks so much again
You can still use the HH4 as a primary, the same instructions apply.
Plenty of other people have done it that way.
Ok ive done all my setting but now i can only connect wireless to my hub slave?and theres no BB light on the hub slave(Secondry)
thanks for help guys
There will not be any BB light, as the slave is not connected to the broadband line.
Did you give the slave hub a different SSID to the home hub, to avoid your devices getting confused as to which one to connect to?