cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
1,507 Views
Message 1 of 7

Signal Attenuation on router at 0

Go to solution
Stats:

Product Name: HomeHub4
2. Serial number: REDACTED
3. Firmware version: v0.07.04.01235-BT (Type B) Last updated [Unknown]
4. Board version: 01B
5. DSL uptime: 3 days, 17:45:05
6. Data Rate: 828 / 19805
7. Maximum Data Rate: 1412 / 21940
8. Noise Margin: 12.1 / 9.0
9. Line Attenuation: 5.2 / 7.5
10. Signal Attenuation: 0.0 / 11.9
11. Data sent/received: 4.6 GB / 145.4 GB
12. Broadband username: bthomehub@btbroadband.com
13. BT Wi-fi: No
14. 2.4GHz wireless network/SSID: REDACTED
15. 2.4GHz wireless connections: Enabled (802.11 b/g/n (up to 144 Mb/s))
16. 2.4GHz wireless security: WPA & WPA2 (Recommended)
17. 2.4GHz wireless channel: Automatic (Smart Wireless)
18. 5GHz wireless network/SSID: REDACTED
19. 5GHz wireless connections: Enabled (802.11 n (up to 300 Mb/s))
20. 5GHz wireless security: WPA2 Only
21. 5GHz wireless channel: Automatic (Smart Wireless)
22. Firewall: Default
23. MAC Address: REDACTED
24. VPI/VCI: 0/38
25. Modulation: G.992.5(ADSL2+)
26. Latency type: Interleaved
27. Software variant: -
28. Boot loader: 0.5.0-BT (Wed Nov 12 11:47:59 2014)

What is with these odd settings?
0 Ratings
6 REPLIES 6
Anonymous
Not applicable
1,488 Views
Message 2 of 7

Re: Signal Attenuation on router at 0

Go to solution
Can I also have interleaving turned off! Please!
0 Ratings
Distinguished Sage
Distinguished Sage
1,482 Views
Message 3 of 7

Re: Signal Attenuation on router at 0

Go to solution

The signal problem is just a hub bug and not causing any problem

 

i think it was your previous resetting of the hub which resulted in latency changing from fast to interleaved but as you jot have 3 days stable the mods can help get you back to fast. Mods will post help here tomorrow



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Moderator
Moderator
1,437 Views
Message 4 of 7

Re: Signal Attenuation on router at 0

Go to solution

@Anonymous Please use the 'click here to contact the mods' link in my forum profile to send in your details. You can find the link by clicking on my username.

Thanks

Neil

0 Ratings
Moderator
Moderator
1,389 Views
Message 5 of 7

Re: Signal Attenuation on router at 0

Go to solution

Hi @Anonymous I called earlier sorry I could not reach you. I just wanted to confirm that I have placed the order to remove Interleaving and this will complete in the next 24 hrs. Please check your connection and post back to confirm it has been completed after this.

 

Cheers

John

 

0 Ratings
Anonymous
Not applicable
1,376 Views
Message 6 of 7

Re: Signal Attenuation on router at 0

Go to solution

Sorry, I wasn't free earlier when you called.

 

I can confirm that interleaving has been turned off. Thank you very much!

0 Ratings
Moderator
Moderator
1,364 Views
Message 7 of 7

Re: Signal Attenuation on router at 0

Go to solution

Hi @Anonymous Thanks for posting back to confirm that the order has completed. I will now close this case.

 

cheers

John

 

0 Ratings