Smart Hub 2 Firmware

[VeteranISPUser]

Hi All,

Out of interest, what is the latest release version of firmware for the SH2 and Discs?

Thanks.

[Ribblelancs]

A new version came through today.

Will look into details and post back........

[VeteranISPUser]

---

@Ribblelancswrote:

A new version came through today.

Will look into details and post back........

---

Hi @Ribblelancs   Thanks. 

[Ribblelancs · Accepted solution]

The hub shows an update today, 29th May.

Hub reset occurred at around 6-00pm, so I checked the hub manager.

Here are the latest versions shown:- hub v0.13.03.0221-BT.

gui 1.55 12-12-2018.

I’m not sure of the changes involved. There’s still no option to split 2.4/5 GHz, though. I will ask for more information, e.g. changelogs, if this is not forthcoming.

[VeteranISPUser]

---

@Ribblelancswrote:

The hub shows an update today, 29th May.

Hub reset occurred at around 6-00pm, so I checked the hub manager.

Here are the latest versions shown:- hub v0.13.03.0221-BT.

gui 1.55 12-12-2018.

I’m not sure of the changes involved. There’s still no option to split 2.4/5 GHz, though. I will ask for more information, e.g. changelogs, if this is not forthcoming.

---

Thanks @Ribblelancs 

[Paul_31]

My hub also got updated to the latest firmware as noted by @Ribblelancs , my Complete Wifi Discs also got an update to Firmware Version: 0.13.03.02251

[JackRussell1964]

I’ve just installed a new Smart Hub 2 after upgrading from the old Hub 5

It has v0.15.00.06145-BT firmware installed.

Is this the latest?

However looking at its logs over the past few days I see several entries that read:-

Download image firmware success

Hub is waiting to apply new firmware

Image validation failure code 9800, validation failure and corruption 

Do I have the latest firmware? Why the download failure messages?

[mojitomaestro]

My smart hub 2 connected to gfast says the firmware is v0.17.01.12301-BT and was updated on 4-Mar-2020.

I really would like to get the option to split 2.4/5 Ghz wireless bands back as on the hub 6 I was able to do this. Now I have to run two routers to achieve the same thing. 😞

[JackRussell1964]

I “Off and On’ed” my Smart Hub 2 yesterday after observing it failing its software download at the same time every 2 days. After it powered up I noticed a date in “Firmware updated” under technical log > Information, where it previously read unknown. Although at that point the actual “Firmware version” was still at v0.15.

Today I am delighted to report that overnight the Hub updated to a new Firmware version of v0.17.01.12301-BT.

It appears that yesterday’s off/on of power did the trick

I can now rest my OCD. 🙂

[mikeo999]

I have this same issue too.