cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
montesansavino
Aspiring Contributor
181 Views
Message 11 of 17

Re: Speed from 5 down to 3.8

Go to solution

Thank you. I have done that.

0 Ratings
john46
Distinguished Sage
174 Views
Message 12 of 17

Re: Speed from 5 down to 3.8

Go to solution

The forum mods normally reply to you personally within 3/5 working days by either  email or phone 

0 Ratings
imjolly
Distinguished Sage
Distinguished Sage
167 Views
Message 13 of 17

Re: Speed from 5 down to 3.8

Go to solution

please repost your stats after mods reset your noise margin to show the improvement - good for forum



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
montesansavino
Aspiring Contributor
155 Views
Message 14 of 17

Re: Speed from 5 down to 3.8

Go to solution

I'll do so

0 Ratings
montesansavino
Aspiring Contributor
122 Views
Message 15 of 17

Re: Speed from 5 down to 3.8

Go to solution

It worked as of 21st October

downlaod 5.9 (7.5 max) and upload 0.72 (0.83 max)

connection details:

ADSL Line Status

Connection information
Line state:Connected
Connection time:1 day, 00:48:53
Downstream:6,595 Kbps
Upstream:847 Kbps
This is as good as it going to get. Thank you for the help.
  ADSL settings
VPI/VCI:0/38
Type:PPPoA
Modulation:G.992.5 Annex A
Latency type:Fast
Noise margin (Down/Up):5.1 dB / 6.3 dB
Line attenuation (Down/Up):48.5 dB / 27.8 dB
Output power (Down/Up):0.0 dBm / 12.8 dBm
FEC Events (Down/Up):0 / 0
CRC Events (Down/Up):206398 / 43
Loss of Framing (Local/Remote):0 / 0
Loss of Signal (Local/Remote):0 / 0
Loss of Power (Local/Remote):0 / 0
Loss of Link (Remote):0
HEC Errors (Down/Up):276819 / 54
Error Seconds (Local/Remote):0 / 26
 
0 Ratings
imjolly
Distinguished Sage
Distinguished Sage
117 Views
Message 16 of 17

Re: Speed from 5 down to 3.8

Go to solution

connection speed looks ok and probably as good as you can get and noise margin now about normal 6db  you are on fast and getting quite a few crc/hec errors so I would watch in case the start to escalate and cause a problem with pages loading at night



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
john46
Distinguished Sage
114 Views
Message 17 of 17

Re: Speed from 5 down to 3.8

Go to solution
interleaving should come on automatically if the errors climb to high
0 Ratings