cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Aspiring Contributor
295 Views
Message 11 of 19

Re: Sticky IP Profile after move to ADSL2+???

Will do!

0 Ratings
Highlighted
Aspiring Contributor
282 Views
Message 12 of 19

Re: Sticky IP Profile after move to ADSL2+???

New stats as promised! I have reset it today to fit my new twisted pair ADSL cable - but I will leave it alone from now on!

 

ADSL line status

Connection information Line state

 

Connected Connection time 0 days, 0:21:49

Downstream 5,979 Kbps

Upstream 1,171 Kbps

ADSL settings VPI/VCI 0/38

Type PPPoA

Modulation ITU-T G.992.5

Latency type Interleaved

Noise margin (Down/Up) 15.5 dB / 6.0 dB

Line attenuation (Down/Up) 34.5 dB / 19.9 dB

Output power (Down/Up) 0.0 dBm / 12.8 dBm

Loss of Framing (Local) 0

Loss of Signal (Local) 0

Loss of Power (Local) 0

FEC Errors (Down/Up) 0 / 0

CRC Errors (Down/Up) 2 / 2147480000

HEC Errors (Down/Up) nil / 0

Error Seconds (Local) 2

0 Ratings
Highlighted
Distinguished Sage
276 Views
Message 13 of 19

Re: Sticky IP Profile after move to ADSL2+???

when the mods contact you just ask them to reset your noise margin then your speed will increase further
0 Ratings
Highlighted
Distinguished Sage
Distinguished Sage
272 Views
Message 14 of 19

Re: Sticky IP Profile after move to ADSL2+???

let it settle ans get your 3+ days conenction time and then ask mods to reset noise margin back to 6db and get increase in speed



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Highlighted
Aspiring Contributor
271 Views
Message 15 of 19

Re: Sticky IP Profile after move to ADSL2+???

Is it likely the SNR will fall back on its own accord over time with DLM?

0 Ratings
Highlighted
Distinguished Sage
Distinguished Sage
266 Views
Message 16 of 19

Re: Sticky IP Profile after move to ADSL2+???

over time it will back that could take a while.  easier and quicker once you get the 3+ days conenction time to get mods to reset back to 6 and get the increased speed



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Highlighted
Aspiring Contributor
224 Views
Message 17 of 19

Re: Sticky IP Profile after move to ADSL2+???

Well another 3 days uninterupted connection and my router re-synced on its own this morning. Noise margin now down to 12dB and an IP profile of 6.44Mbps.

 

ADSL line status

Connection information
Line stateConnected
Connection time0 days, 9:12:57
Downstream7,343 Kbps
Upstream1,171 Kbps

 

ADSL settings
VPI/VCI0/38
TypePPPoA
ModulationITU-T G.992.5
Latency typeInterleaved
Noise margin (Down/Up)12.2 dB / 6.6 dB
Line attenuation (Down/Up)34.5 dB / 19.9 dB
Output power (Down/Up)0.0 dBm / 12.8 dBm
Loss of Framing (Local)11
Loss of Signal (Local)1
Loss of Power (Local)0
FEC Errors (Down/Up)0 / 0
CRC Errors (Down/Up)120 / 2147480000
HEC Errors (Down/Up)nil / 0
Error Seconds (Local)1

 

 

0 Ratings
Highlighted
Aspiring Contributor
221 Views
Message 18 of 19

Re: Sticky IP Profile after move to ADSL2+???

As an additional note, the HH2 error reporting is a littlie suspect as the error seconds fluctuate between 1 and several hundred with just a few refreshes of the stats page! Any ideas?

0 Ratings
Highlighted
Distinguished Sage
218 Views
Message 19 of 19

Re: Sticky IP Profile after move to ADSL2+???

just maintain a stable connection and after 3days contact the mods for a noise margin reset
0 Ratings