Just reconnected my homehub 2.0 backup after having a BT engineer sort out some high resistance issues this morning.
Speed are slow still 0.7 Mb, though was 0.38Mb before that. I know i have to wait 10 tens, but was wondering if it might be an issue as im using a Homehub that i didnt receive.
i.e. had a Homehub 1.0 from previous house, which i have always used previously.. However, Dad gave me an old 2.0 which i have plugged in since.
a) does it matter, do BT need to be notified as it will change my settings
b) should i need to restore the 2.0 hub to factory defaults?
Solved! Go to Solution.
You can use any homehub or router you want and you don't need to notify BT.
I would do a factory restore by pressing a pin into the recess button on the rear for 20 seconds. This will clear out any previous configuration settings and give you a clean sheet to start from. Just make sure the wireless passkey on the label is still readable before you do the reset as you'll need it to connect any wireless devices.
Hi thanks for the replies, ive gone to 192.168.1.254 but cant see any 'advanced option'? just details on my services and my networks...
I havent reset to factory defaults yet either, should i do this first?
Im guessing the details are hidden behind the password protected area, which my dad cant remember the password so i take it i should just reset the hub now anyways?
ADSL line status
|Connection time||0 days, 0:05:40|
|Noise margin (Down/Up)||10.1 dB / 7.0 dB|
|Line attenuation (Down/Up)||63.5 dB / 31.5 dB|
|Output power (Down/Up)||14.5 dBm / 12.0 dBm|
|Loss of Framing (Local)||0|
|Loss of Signal (Local)||0|
|Loss of Power (Local)||0|
|FEC Errors (Down/Up)||795 / 0|
|CRC Errors (Down/Up)||0 / N/A|
|HEC Errors (Down/Up)||N/A / 0|
|Error Seconds (Local)||0|