cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
chris889
Aspiring Contributor
580 Views
Message 1 of 4

homehub 5

Go to solution

just want to know if their is anything on here that needs improving or is fine

 

. Product Name: HomeHub5 2.     3. Firmware version: v0.07.05.0A13-BT (Type B) Last updated 17/12/2015 4. Board version: 01 5. VDSL uptime: 5 days, 21:12:05 6. Data Rate: 7958 / 72283 7. Maximum Data Rate: 13536 / 86930 8. Noise Margin: 14.8 / 6.3 9. Line Attenuation: 23.9 / 15.1 10. Signal Attenuation: 0.0 / 0.0 11. Data sent/received: 3.5 GB / 126.8 GB 12. Broadband username: bthomehub@btbroadband.co

0 Ratings
3 REPLIES 3
imjolly
Distinguished Sage
Distinguished Sage
556 Views
Message 2 of 4

Re: homehub 5

Go to solution

your connection looks stable with 5 days conenction time.  I would hope for a higher up speed nearer attainable and similar with down speed.  you don't have to do anything apart from remain connected 24/7 and DLM will eventaully make any changes necessary  

 

http://community.plus.net/library/browsing/fttc-dlm-what-it-is-how-it-works/



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
chris889
Aspiring Contributor
546 Views
Message 3 of 4

Re: homehub 5

Go to solution

yea it has been up for 5 days but usually discconects on the 10th day

0 Ratings
imjolly
Distinguished Sage
Distinguished Sage
544 Views
Message 4 of 4

Re: homehub 5

Go to solution

just leave it connected and a reset every 10 days will not affect it - mine used to reset every 14 ays like clockwork but speed and noise margin were the same when it re-connected immediately



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings