Hi, I have four BT whole home discs and a BT home hub 5, which is running on fibre to the house with a speed direct to the router of around 900mbs. The slave disc is right next to the router and I have another disc in our main living room, 1 in our kitchen and the third in a bedroom immediately above the room the router is in. Using the BT Whole home app, I can see I get very good signal to all discs and when they are all running no blackspots in the house and esily able to cope with all the devices connected.
The issue i have, is that the disc in the bedroom disconnects on a regular basis. I swapped this disc with another to see if the issue was the disc, but the disc I swapped did the same thing and kept disconnecting. I do not have the same issue with the other discs, unless the actual router goes down, which not the case when the disc disconnects. As such, I am puzzled as to why a disc will keep disconnecting when it is in the room above the room the router is in.
If anyone has any thoughts as to a reason, I would be interested to hear them.
Thanks,
Sdigs.
