cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Murdo1
Beginner
459 Views
Message 1 of 3

Forwarding Ports on Smart Hub for Reolink NVR

Hi All

One last throw of the dice before I change out my smart hub in desperation.

Does anyone know any issues around smart hub blocking the use of forwarding ports 554,80, 9000 etc. I've set up the rule on the home hub. Selected upnp on the router advanced settings and same on IP camera software. Checked that rule is set up for local IP address connected to the ethernet that's going into port 1. Checked that the local ip matches with IP camera software.

Finally i used canyouseeme to check the ports and all showing closed.

I have read that there's issues with the smart hub but from experience these things are usually operator error. Any help much appreciated.

 

0 Ratings
Reply
2 REPLIES 2
licquorice
Distinguished Sage
Distinguished Sage
447 Views
Message 2 of 3

Re: Forwarding Ports on Smart Hub for Reolink NVR

Disable UPnP if you have manually forwarded the ports.

0 Ratings
Reply
Murdo1
Beginner
440 Views
Message 3 of 3

Re: Forwarding Ports on Smart Hub for Reolink NVR

Thanks for the reply

I deselected UPnp but still showing ports closed on twhen tested.
0 Ratings
Reply