cancel
Showing results for 
Search instead for 
Did you mean: 
tonyw1
Contributor
3,784 Views
Message 1 of 128

Smart Hub (6 type A) Firmware update.

Go to solution

Hi, 

Has there been a firmware update on the Smart Hub 6 type A in the last few days?

I'm away so can't check the router, but the IP address changed unexpectedly on 30th may and again on 2nd June. Last year, when the firmware updated, it went through a DLM reset and 10 day learning period, I'm hoping that's all it is this time.

Normaly it's rock solid apart from a reboot every 14 days.

0 Ratings
Reply
127 REPLIES 127
Dippu
Aspiring Expert
3,775 Views
Message 2 of 128

Re: Smart Hub (6 type A) Firmware update.

Go to solution
Yes the latest update is SG4B1000E016 mine updated last week. Be aware that the hub shows incorrect date of installation. Mine shows 28 November 2018. Done Restarts and Factory Resets, still shows incorrect date.
tonyw1
Contributor
3,763 Views
Message 3 of 128

Re: Smart Hub (6 type A) Firmware update.

Go to solution

Thanks for confirming that, it'll probably settle down again over the next ten days.

Port forwarding is working and I can remotely access my security cameras so my user settings are still there which is always a concern with a firmware update.

Thanks again for your help.

0 Ratings
Reply
DavidCo
Expert
3,685 Views
Message 4 of 128

Re: Smart Hub (6 type A) Firmware update.

Go to solution

Thanks for the 'heads up' on that.

My speed dropped overnight and snr went upSmiley Sad

I wonder wether we will be informed about any changes in this update?

 

0 Ratings
Reply
tonyw1
Contributor
3,652 Views
Message 5 of 128

Re: Smart Hub (6 type A) Firmware update.

Go to solution

With a bit of luck it will stop the 14 day reboots. I had a type B and that didn't do that, but it did once do a factory reset due to a corrupt database and lost my user settings so it had to go. Fortunately I wasn't away at the time and was able to deal with it but I'm away a lot and rely on accessing my home automation and cameras remotely.

DavidCo
Expert
3,636 Views
Message 6 of 128

Re: Smart Hub (6 type A) Firmware update.

Go to solution

IPv6 changes but still no DNS (IPv6):smileyfrustrated:

0 Ratings
Reply
Dippu
Aspiring Expert
3,601 Views
Message 7 of 128

Re: Smart Hub (6 type A) Firmware update.

Go to solution
@DavidCo , @tonyw1 Does your hub show correct date of firmware update?
0 Ratings
Reply
DavidCo
Expert
3,595 Views
Message 8 of 128

Re: Smart Hub (6 type A) Firmware update.

Go to solution

No, it is 1 day out

 

0 Ratings
Reply
tonyw1
Contributor
3,578 Views
Message 9 of 128

Re: Smart Hub (6 type A) Firmware update.

Go to solution

I can't access mine until I return. BT only allow their staff to access the router web interface remotely.

0 Ratings
Reply
Highlighted
clever_trevor
Contributor
3,575 Views
Message 10 of 128

Re: Smart Hub (6 type A) Firmware update.

Go to solution

Hi - mine says updated 3rd June 2019 / firmware SG4B1000B540

0 Ratings
Reply