I have had a Whole Home network and recently one of the discs stopped working. I have deleted it from the Whole Home app, but now cannot re add it. It appears on my router as connected to the Whole Home Wi-fi, but doesn’t appear in the app. If I change the led displays for the Whole Home discs, it’s brightness changes as well. I have reset it a number of times, and tried on iPhone and iPad to add it
Solved! Go to Solution.
Hi, couple of thoughts to try.
How is your "rogue" disc connected to your router - Wifi or Ethernet?
Was that disc part of the same pack as the other discs, or was it an add-on. If the latter, make sure you temporarily plug it into your router with an ethernet cable when you do the reset, then leave it there until you see the blue light permanently staying solid for several minutes.
Have you tried rebooting your whole system? Power-off all your discs, then switch them all back on, starting with the main disc that's plugged into your router and waiting for its light to be permanently solid blue, then power all the other discs back on. Then leave it alone for a few hours / day to let it settle in its final config.
|Did you get the help you needed?|
Help others by clicking on ‘Mark as accepted solution’
|Show your appreciation!|
Click on the star next to a reply to say thanks
|Help guide to using the community? Click below|
|I am a BT Employee and an expert on BT Devices queries. I am here volunteering my own time to give advice, and help where I can with BT device queries. Go here for more info.|