- BT Community
- /
- Archive
- /
- Archive Staging
- /
- Re: 5 Openreach engineers, 1 new socket, 2 new fac...
- Subscribe to this Topic's RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
5 Openreach engineers, 1 new socket, 2 new faceplates and 1 replacement smart hub 2 later...
Hi
Hoping someone here can help with the issue I've been having for the past 6 months, though I've seen a lot of posts on this subject.
Long story short:
Moved from Virgin to BT in February 2020, since then I've had nothing but problems maintaining a stable connection. Main problem is the speed of the line slowing down, I have a 50Mb contract, after two weeks I'm down to 25Mb or worse. Log call with BT, Openreach engineer arrives, checks line, all good, boosts speed back up, sure enough 2 weeks later its back down again, I am also suffering multiple disconnections, today I've had 10 in the last 4 hours, usual flashing lights then back to blue.
I'm now having to work from home due to a bereavement and a parent with the early stage of dementia so need my connection to work. Strangely enough I have the exact same package and smart hub in my own flat in London and do not have any of the problems I suffer here in the outskirts of a small city in the east of England.
List of works so far:
1 new socket installed at time of move from VM to BT. Its the only working socket in the house.
2 new faceplates by OR engineers
After much arguing with BT a new Smart Hub 2 was sent and installed to rule out device issues.
Not much connected to the Wi-Fi, 2 laptops and nothing else as BT were accusing my devices of causing the problems.
Line test has come back clear (OR engineers check this first, I've also run my own tests which came back clear, no noise). I've wi-fi sniffed networks near me but there are very few and none using the channels I'm on so no clashes
I've disabled smart setup and enabled and disabled the smart scan function to no avail.
Details from the new hub (I've removed mac addy and wifi name from below) - its been 2 days now since they boosted the speed back up...and its dropped to below 40Mb already..
Serial number:+091298+2030029387
Firmware version:v0.17.01.12312-BT
Board version:R01
GUI version:1.56 15_02_2019
DSL uptime:0 days,00 Hours25 Mins52 Secs
Data rate:9.946 Mbps / 39.973 Mbps
Maximum data rate:10.079 Mbps / 48.104 Mbps
Noise margin:6.3 / 9.9
Line attenuation:6.5 / 20.7
Signal attenuation:6.6 / 19.6
VLAN id:101
Upstream error control:Off
Downstream error control:Off
Data sent / received:3.1 MB Uploaded / 11.2 MB Downloaded
Broadband username:bthomehub@btbroadband.com
BT Wi-fi:Activated
2.4 GHz wireless network name:
2.4 GHz wireless channel:Channel: 1
5 GHz wireless network name:
5 GHz wireless channel:Channel: 40
Wireless security:WPA2 (Recommended)
Wireless mode:Mode 1
Firewall:On
MAC address:
Software variant:-
Boot loader:0.1.7-BT (Thu Nov 30 09:45:22 2017)
This is what the error log records when a disconnection happens:
11:49:15, 21 Sep.
11:49:03, 21 Sep.
11:49:03, 21 Sep.
11:49:02, 21 Sep.
11:49:02, 21 Sep.
11:48:28, 21 Sep.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
Re: 5 Openreach engineers, 1 new socket, 2 new faceplates and 1 replacement smart hub 2 later...
1st question based on: "Not much connected to the Wi-Fi, 2 laptops and nothing else as BT were accusing my devices of causing the problems."
How are you performing the speed tests? Wireless or Wired? If Wireless then you will be unlikely to get close to the top speed. Wireless is renowned for having speed issues. You could try changing WiFi channels and findint the one with the best speed. Can you (if you haven't) perform a wired speed test?
CJT80
Say thanks by clicking the Thumbs Up icon. Have I resolved your issue? Click "Mark As Accepted Solution"
- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
Re: 5 Openreach engineers, 1 new socket, 2 new faceplates and 1 replacement smart hub 2 later...
Tried both, OR engineers have done the same.
The speed starts in the high 40's then over a period of 2 weeks drops to well below the stated line speed, regardless of the connection (and to be honest even if it was wireless I wouldn't expect the drop to be so dramatic though I take your point). I should add the speed doesn't increase until someone resets it. The last OR engineer showed me the graph over a period of time and you can see the gradual decrease. He said the system was designed to constantly drop the speed if it thinks there are problems on the line until it finds a speed its happy with. Thing is there are no problems on the line according to 5 OR engineers...
imjolly
- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
Re: 5 Openreach engineers, 1 new socket, 2 new faceplates and 1 replacement smart hub 2 later...
can you enter your phone number and post results remember delete number will show estimated connection speed range https://www.broadbandchecker.btwholesale.com/#/ADSL
Have you tried the test socket with a filter to see if that helps stability?
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to this message's RSS Feed
- Highlight this Message
- Report Inappropriate Content
Re: 5 Openreach engineers, 1 new socket, 2 new faceplates and 1 replacement smart hub 2 later...
Featured Products | Downstream Line Rate(Mbps) | Upstream Line Rate (Mbps) | Downstream Handback | WBC FTTC Availability Date | WBC SOGEA Availability Date | Left in Jumper | ||
| Threshold(Mbps) | ||||||||
| High | Low | High | Low | |||||
| VDSL Range A (Clean) | 48.7 | 36.9 | 10.6 | 6.1 | 34.6 | Available | Available | -- |
| VDSL Range B (Impacted) | 47.3 | 34.4 | 10.2 | 5.5 | 28.1 | Available | Available | -- |
Featured Products | Downstream Line Rate(Mbps) | Upstream Line Rate (Mbps) | Downstream Range (Mbps) | Availability Date | FTTP Install Process | |||
| FTTP on Demand | 330 | 30 | -- | Available | -- | |||
ADSL Products | Downstream Line Rate (Mbps) | Upstream Line Rate (Mbps) | Downstream Range(Mbps) | ADSL Availability Date | WBC SOADSL Availability Date | Left in Jumper | ||
| WBC ADSL 2+ | Up to 17 | -- | 10 to 19.5 | Available | Available | Yes | ||
| WBC ADSL2+ Annex M | Up to 17 | Up to 1.5 | 10 to 19.5 | Available | Available | Yes | ||
| ADSL Max | Up to 7.5 | -- | 6.5 to 8 | Available | Available | -- | ||
| WBC Fixed Rate | 2 | -- | -- | Available | Available | Yes | ||
| Fixed Rate | 2 | -- | -- | Available | -- | -- | ||
Observed Speeds | VDSL | |||||||
| Max Observed Downstream Speed | 32.4 | |||||||
| Max Observed Upstream Speed | 0.8 | |||||||
| Observed Date | ######## | |||||||
Other Offerings | Availability Date | |||||||
| VDSL Multicast | Available | |||||||
| ADSL Multicast | Available | |||||||
Premise Environment | Status | |||||||
| Bridge Tap | N | |||||||
| VRI | N | |||||||
| NTE FacePlate | N | |||||||
| Last Test Date | ######## | |||||||
Exchange Product Restrictions | Status | |||||||
| FTTP Priority Exchange | N | |||||||
| WLR Withdrawal | N | |||||||
| SOADSL Restriction | Y |
