cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
scjgreen
Aspiring Contributor
788 Views
Message 341 of 1,267

Re: BT Fibre 900 Upgrade / Smart HubWa 2 upload throttling

Joined BT Fibre 900 last week.

Had an issue with the Wrong Router being sent out.

Just received the correct Router but im capped at 50MB Upload

Can someone help please

0 Ratings
Reply
Forthay
Expert
745 Views
Message 342 of 1,267

Re: BT Fibre 900 Upgrade / Smart HubWa 2 upload throttling

Make sure you have the v17 of the firmware
Try rebooting the Smarthub2 via the Smarthub2 GUI interface
If these don't work call the FTTP team and they'll fix it. It sounds like a known issue several people have had.

0 Ratings
Reply
scjgreen
Aspiring Contributor
741 Views
Message 343 of 1,267

Re: BT Fibre 900 Upgrade / Smart HubWa 2 upload throttling

The Hub is on V15.... Bit annoying for a Hub I received yesterday to be so out of date.

Do you have a Contact Number for them?

0 Ratings
Reply
bp1000
Aspiring Contributor
723 Views
Message 344 of 1,267

Re: BT Fibre 900 Upgrade / Smart HubWa 2 upload throttling

Can you try what I wrote on the previous page. 

In summery, advanced settings broadband connection. Press disconnect, wait, when it’s disconnected, reconnect. 

This happened to me on Tuesday with my install. FTTP couldn’t even see my line in my account yet as it was not a closed order via the Openreach team so they couldn’t push any updates to me. 

It was solved as I explained above. 

0 Ratings
Reply
scjgreen
Aspiring Contributor
721 Views
Message 345 of 1,267

Re: BT Fibre 900 Upgrade / Smart HubWa 2 upload throttling

Tried that just now. No difference
0 Ratings
Reply
mcewan7
Beginner
690 Views
Message 346 of 1,267

Re: BT Fibre 900 Upgrade / Smart HubWa 2 upload throttling

Same situation as you, I got my upgrade yesterday and the Smart Hub 2 is capped at 50, I can plug my old Hub in and get 100. My new hub is on the older v0.15.00.06145-BT firmware.

I guess this needs to be updated to V0.17.01.12301-BT but I don't think theres any way to force this to happen. I've tried all the resets, disconnects and reboots etc. Guess I just have to wait for the router to decide its time to check for an update.

0 Ratings
Reply
bp1000
Aspiring Contributor
687 Views
Message 347 of 1,267

Re: BT Fibre 900 Upgrade / Smart HubWa 2 upload throttling

Reboot 4 times 

try disconnecting and reconnecting manually 

 

if not call them. Google the number or find it early in this thread. 

As I said, install this Tuesday, sh2 is also v15 - rebooting and reconnecting worked. BT couldn’t even see my hub yet, all solved by me. 

0 Ratings
Reply
pippincp
Sage
683 Views
Message 348 of 1,267

Re: BT Fibre 900 Upgrade / Smart HubWa 2 upload throttling

@mcewan7 @scjgreen  You mean this number for the FTTP team? 0800 587 4787

0 Ratings
Reply
mcewan7
Beginner
673 Views
Message 349 of 1,267

Re: BT Fibre 900 Upgrade / Smart HubWa 2 upload throttling

Thanks for number
0 Ratings
Reply
s1lverfox
Aspiring Contributor
601 Views
Message 350 of 1,267

Re: BT Fibre 900 Upgrade / Smart HubWa 2 upload throttling

Hi, I recently had  900 FTTX, an upgrade from 40mbps FTTC Installed but have found that I've only had 20Mbps upload.

 

I've followed the instructions in this thread about backup , reset and restore and that doesn't seem to have done anything, I managed one speedtest on fast.com at 43mbps upload after the reset, but it went back to being capped at just under 20mpbs (I average 17-19mbps upload).

I'm meant to get the 115mbps upload.

Smarthub-2 

Connection type: External (FTTX)

 

Firmware version: v0.17.01.12312-BT

 

Firmware updated: 4-Jul-2020

Help?

 

 

0 Ratings
Reply