cancel
Showing results for 
Search instead for 
Did you mean: 
NewtronStar
Expert
838 Views
Message 61 of 138

Re: BT G.INP?

I would read the Kitz forum regarding G.INP it would quickly put the ECI modem/cabinet debate to bed.

 

http://forum.kitz.co.uk/index.php/topic,15190.0.html

 

0 Ratings
Reply
Distinguished Guru
833 Views
Message 62 of 138

Re: BT G.INP?

Does it? It seems to leave more questions AFAICS
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you found this post helpful, please click on the star on the left
If not, I'll try again 🙂
0 Ratings
Reply
dlmfun
Contributor
824 Views
Message 63 of 138

Re: BT G.INP?

i dont undertsand how g.inp works? is it basically another form of dlm or does it work along side dlm? and how is it possible to tell if g.inp is active.

0 Ratings
Reply
Sage
Sage
802 Views
Message 64 of 138

Re: BT G.INP?

Read the article linked to in post 58.

0 Ratings
Reply
Distinguished Guru
801 Views
Message 65 of 138

Re: BT G.INP?

It seems to be an alternative to Interleaving and INP. If a data packet is damaged by noise then the damaged bits are retransmitted down a separate data channel and it is repaired on the fly.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you found this post helpful, please click on the star on the left
If not, I'll try again 🙂
0 Ratings
Reply
dlmfun
Contributor
793 Views
Message 66 of 138

Re: BT G.INP?

i get what you mean, guess it would make dlm less likely to kick in at that rate then, i wonder if my dlm was triggered by g.inp because whenever i had dlm on before, i was still getting crc errors aswell as fec errors and today ive not had one single crc error and thats never happened in the 8 or 9 months ive been checking.

0 Ratings
Reply
Distinguished Guru
785 Views
Message 67 of 138

Re: BT G.INP?

If you can see CRCs and FECs surely you can see if G.INP is active?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you found this post helpful, please click on the star on the left
If not, I'll try again 🙂
0 Ratings
Reply
dlmfun
Contributor
780 Views
Message 68 of 138

Re: BT G.INP?

ive  just read some info on that link that tells you about it and it says that with g.inp on, it will say bearer 0 and bearer 1 in the modem stats.

0 Ratings
Reply
Sage
Sage
778 Views
Message 69 of 138

Re: BT G.INP?

That's correct. Do you see them?

0 Ratings
Reply
dlmfun
Contributor
775 Views
Message 70 of 138

Re: BT G.INP?

my modem doesnt show the bearer part but the guy who posted the info in the link said he used dslstats software and maybes thats the only way to get it to show, maybe it shows all the added info that doesnt usually show within the modem stats.

0 Ratings
Reply