Have you tried to use the test socket? Connect your hub to that and see if that makes any difference.
Just to prove the speedtest.net servers are overloaded and will give you different results!
First is Middlesbrough server with 44Mbps, the second is Newcastle server with 59 Mbps and the last is the result from speedof.me test site with 63Mbps. Use the test socket and check the speed on different servers with wireless and wired connection as well. If you still have issues I think a moderator will probably have a look at this for you.
Thanks all for posting. There's some usefull comments on this thread. We would always recommend using the wholesale speed tester on a wired connection but you'll also see your connection speed in your hub stats (thanks @licquorice @pippincp for pointing that out). Wireless will alwys show a descrepency in the speed but I take your point @matekaneve . I hope you've got the advice you were looking for @jaypeegolf .
|Did you get the help you needed?|
Help others by clicking on ‘Mark as accepted solution’
|Show your appreciation!|
Click on the star next to a reply to say thanks
|Help guide to using the community? Click below|
|Please avoid contacting us (moderators) via private message, for account/fault issues, unless invited to do so. The community will be able to help answer your question so we encourage you to create a new thread if you can’t find the answer from existing discussions. The moderators will be around to lend a hand should the community not have the answers. Thank You|
HH6 Advanced settings/technical log/information.