cancel
Showing results for 
Search instead for 
Did you mean: 
thomasmulhall
Contributor
453 Views
Message 21 of 43

Re: Bt infinity 2 DLM

my new stats are this and stage the noise margin is now 9.1/12.0

 

1. Product name:BT Home Hub
2. Serial number:+068342+NQ34434564
3. Firmware version:Software version 4.7.5.1.83.8.173.1.6 (Type A) Last updated 12/01/14
4. Board version:BT Hub 5A
5. VDSL uptime:0 days, 03:42:27
6. Data rate:20000 / 79995
7. Maximum data rate:25493 / 102455
8. Noise margin:9.1 / 12.0
9. Line attenuation:0.0 / 5.5
10. Signal attenuation:0.0 / 5.5
11. Data sent/received:512.9 MB / 1.7 GB
12. Broadband username:bthomehub@btbroadband.com
13. BT Wi-fi:Yes
14. 2.4 GHz Wireless network/SSID:BTHub5-6X8N
15. 2.4 GHz Wireless connections:Enabled (802.11 b/g/n (up to 300 Mb/s)) 20/40 MHz, WPS enabled
16. 2.4 GHz Wireless security:WPA2
17. 2.4 GHz Wireless channel:Automatic (Smart Wireless)
18. 2.4 GHz Wireless network/SSID:BTWiFi-with-FON
19. 2.4 GHz Wireless connections:Enabled (802.11 b/g/n (up to 300 Mb/s)) 20/40 MHz, WPS disabled
20. 2.4 GHz Wireless security:None
21. 2.4 GHz Wireless channel:Automatic (Smart Wireless)
22. 2.4 GHz Wireless network/SSID: 
23. 2.4 GHz Wireless connections:Enabled (802.11 b/g/n (up to 300 Mb/s)) 20/40 MHz, WPS disabled
24. 2.4 GHz Wireless security:None
25. 2.4 GHz Wireless channel:Automatic (Smart Wireless)
26. 2.4 GHz Wireless network/SSID:Auto-BTWiFi
27. 2.4 GHz Wireless connections:Disabled
28. 2.4 GHz Wireless security:None
29. 2.4 GHz Wireless channel:Automatic (Smart Wireless)
30. 2.4 GHz Wireless network/SSID: 
31. 2.4 GHz Wireless connections:Disabled
32. 2.4 GHz Wireless security:None
33. 2.4 GHz Wireless channel:Automatic (Smart Wireless)
34. 5 GHz Wireless network/SSID:BTHub5-6X8N-5GHz
35. 5 GHz Wireless connections:Enabled (802.11 a/n/ac (up to 1300 Mb/s)) 80 MHz, WPS enabled
36. 5 GHz Wireless security:WPA2
37. 5 GHz Wireless channel:Automatic (Smart Wireless)
38. 5 GHz Wireless network/SSID:BTWiFi-with-FON
39. 5 GHz Wireless connections:Enabled (802.11 a/n/ac (up to 1300 Mb/s)) 80 MHz, WPS disabled
40. 5 GHz Wireless security:None
41. 5 GHz Wireless channel:Automatic (Smart Wireless)
42. 5 GHz Wireless network/SSID: 
43. 5 GHz Wireless connections:Enabled (802.11 a/n/ac (up to 1300 Mb/s)) 80 MHz, WPS disabled
44. 5 GHz Wireless security:None
45. 5 GHz Wireless channel:Automatic (Smart Wireless)
46. 5 GHz Wireless network/SSID:Auto-BTWiFi
47. 5 GHz Wireless connections:Disabled
48. 5 GHz Wireless security:None
49. 5 GHz Wireless channel:Automatic (Smart Wireless)
50. 5 GHz Wireless network/SSID: 
51. 5 GHz Wireless connections:Disabled
52. 5 GHz Wireless security:None
53. 5 GHz Wireless channel:Automatic (Smart Wireless)
54. Firewall:Default
55. MAC Address:18:62:2c:44:c3:86
56. Software variant:-
57. Boot loader:-
0 Ratings
Reply
thomasmulhall
Contributor
451 Views
Message 22 of 43

Re: Bt infinity 2 DLM

now it is 12.4

0 Ratings
Reply
thomasmulhall
Contributor
450 Views
Message 23 of 43

Re: Bt infinity 2 DLM

noise margin keeps going up and down

0 Ratings
Reply
thomasmulhall
Contributor
440 Views
Message 24 of 43

Re: Bt infinity 2 DLM

oh so the stats say i should be getting 29 Mbps woulden that be a case that there is a fault somewere because estimate speeds are 78Mbps to 80Mbps

0 Ratings
Reply
Moderator
Moderator
437 Views
Message 25 of 43

Re: Bt infinity 2 DLM

Hi thomasmulhall,

 

Are you connected via wireless or ethernet when running your speed tests? If it's wireless can you try connecting an ethernet cable and let us know what you are getting?

 

Thanks


Neil

Community ModeratorNeilO
Did you get the help you needed?
Help others by clicking on ‘Mark as accepted solution’
Show your appreciation!
Click on the star next to a reply to say thanks
Help guide to using the community? Click below
Kudos”Kudos”
0 Ratings
Reply
thomasmulhall
Contributor
433 Views
Message 26 of 43

Re: Bt infinity 2 DLM

ok i will try speedtest using ethernet

0 Ratings
Reply
thomasmulhall
Contributor
419 Views
Message 27 of 43

Re: Bt infinity 2 DLM

ok i get 69 Mbps when using ethernet

0 Ratings
Reply
thomasmulhall
Contributor
417 Views
Message 28 of 43

Re: Bt infinity 2 DLM

but i get 60 to 70Mbps when using the 5ghz

0 Ratings
Reply
Distinguished Expert
412 Views
Message 29 of 43

Re: Bt infinity 2 DLM

Yeah, you're just seeing wireless interference on 2.4GHz.
--
To say thanks for a helpful answer, please click the white star
0 Ratings
Reply
thomasmulhall
Contributor
410 Views
Message 30 of 43

Re: Bt infinity 2 DLM

ok so how do i fix it. i have the bt home hub under the tv on the stand

0 Ratings
Reply