We don’t use the phone line - however when we do plug into it to test as you have mentioned, there is nothing wrong
You need to check for noise when you start getting disconnections, as the fault may be intermittent.
What does your master phone socket look like?
That makes sense. I will test around 11 am today (when it usually disconnects) and I will get back to you. Also, Our socket is the bottom right one !
You need to check at the test socket, as these clip on filters suffer from intermittent connections.
Connect thing up like this, leave it a day or so, and see if you still get the disconnections.
Bottom picture just shows how to connect thing up.
Will do thanks !
There was a recent post from someone with a similar problem.
I do not think that those clip on filters are a good idea, as there is a possibilty of a poor connection between the test socket, and the clip on faceplate.
Here is an updated diagram for reference, and in case others want do a check on an NTE 5C. This would apply even if there was no filtered faceplate.