cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Aspiring Contributor
142 Views
Message 1 of 7

Fault on Line? Syncing at 7mb instead of 40mb

My hub will only sync at 7mb down and 12mb up. When I try and run the fault website it stops at 99%. Would is best to contact about this?

 

Thanks!

0 Ratings
Reply
6 REPLIES 6
Highlighted
Distinguished Sage
Distinguished Sage
135 Views
Message 2 of 7

Re: Fault on Line? Syncing at 7mb instead of 40mb

Have. You checked you have a dial tone?  If so dial 17070 option 2 should be silent and best with corded phone 

can you post hub stats. If hh6 go to advanced settings then technical log information 



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply
Highlighted
Aspiring Contributor
125 Views
Message 3 of 7

Re: Fault on Line? Syncing at 7mb instead of 40mb

Sadly we don’t use the landline ever and don’t have access to a phone to test this. 

Info from HH6 below:

Product name:

BT Hub 6A

Serial number:

+084316+NQ71690714

Firmware version:

SG4B1000E01E

Firmware updated:

27-Aug-2019

Board version:

1.0

Gui version:

1.105.0

DSL uptime:

0 Days, 1 Hours 15 Minutes 16 Seconds

Data rate:

10.00 Mbps / 6.91 Mbps

Maximum data rate:

12657 / 8380

Noise margin:

8.7 dB / 7.4 dB

Line attenuation:

23.8 dB

Signal attenuation:

0 dB / 23.8 dB

VPI / VCI:

0/38

Modulation:

G_993_2_ANNEX_B

Latency type:

Fast Path

Data sent / received:

37 MB Uploaded / 433 MB Downloaded

Broadband username:

bthomehub@btbroadband.com

BT Wi-fi:

Not active

2.4 GHz wireless network name:

 

2.4 GHz wireless channel:

Channel 1

5 GHz wireless network name:

 

5 GHz wireless channel:

Channel 36

Wireless security:

WPA2 (Recommended)

Wireless mode:

Mode 1

Firewall:

On

MAC address:

F4:6B:EF:2B:8E:FD

Software variant:

-

Boot loader:

 

Thanks
0 Ratings
Reply
Highlighted
Sage
119 Views
Message 4 of 7

Re: Fault on Line? Syncing at 7mb instead of 40mb

Its a pity you don't have a phone as it looks like a possible phone line fault. I'd guess at only one wire connected but as you cannot confirm the problem you'll have to take the longer broadband fault report loop.

0 Ratings
Reply
Highlighted
Aspiring Contributor
110 Views
Message 5 of 7

Re: Fault on Line? Syncing at 7mb instead of 40mb

Thanks for the reply. How do I start that process? 

I will try and source a phone. 

0 Ratings
Reply
Highlighted
Distinguished Sage
Distinguished Sage
97 Views
Message 6 of 7

Re: Fault on Line? Syncing at 7mb instead of 40mb


@bentleyboo wrote:

Thanks for the reply. How do I start that process? 

I will try and source a phone. 


If you do not get dial tone, or there is noise on the line, then you need to report it as either no dial tone, or a noisy line. Do not mention the broadband problem, otherwise it will end up in the wrong fault queue, and take much longer to be fixed. There are plenty of people who can fix phone faults, but not as many broadband people.

Once the phone fault is fixed, then the broadband will get better.

0 Ratings
Reply
Highlighted
Aspiring Contributor
81 Views
Message 7 of 7

Re: Fault on Line? Syncing at 7mb instead of 40mb

Found a phone in the garage and there is no issue with the phone line....

When I try the fault finder on BT it freezes at 99% every time.

 

0 Ratings
Reply