cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
drevilbob
Beginner
393 Views
Message 1 of 5

Fibre 1 but only getting 40/10

I’ve gotten Fibre 1 installed as a second line and I’ve noticed that it’s locked at 40/10 for the line profile.

 

here’s the stats:

DSL uptime:0 days,00 Hours14 Mins10 Secs
 

 

Data rate:9.42 Mbps / 39.999 Mbps
 

 

Maximum data rate:9.420 Mbps / 52.977 Mbps
 

 

Full Fibre (FTTP) Mode:Off
 

 

Noise margin:6.2 / 11.1
 

 

Line attenuation:10.2 / 20.4
 

 

Signal attenuation:10.2 / 22.2
 

 

 
Tags (1)
0 Ratings
Reply
4 REPLIES 4
imjolly
Distinguished Sage
Distinguished Sage
349 Views
Message 2 of 5

Re: Fibre 1 but only getting 40/10

When did you get the broadband ?  If last day or so maybe wait a few more days and see if DLM improves speed

Can you Check your package in MYBT to make sure it says fibre 1



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply
pippincp
Distinguished Sage
348 Views
Message 3 of 5

Re: Fibre 1 but only getting 40/10

You appear to be in a banded profile. Your uptime is only 14mins, is this due to you resetting the hub to try and increase the speed or the hub dropping connection?

Is there any noise on your line? 17070 option 2, best with corded phone. It should be silent between announcements, you may get a dull hub with a cordless.

0 Ratings
Reply
drevilbob
Beginner
337 Views
Message 4 of 5

Re: Fibre 1 but only getting 40/10

Oh sorry about that the Cat managed to pull the psu cable out. I moved it so it wouldn’t happen again

0 Ratings
Reply
drevilbob
Beginner
335 Views
Message 5 of 5

Re: Fibre 1 but only getting 40/10

It’s comes up as fibre 1
0 Ratings
Reply