cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
dilosec
Aspiring Expert
622 Views
Message 31 of 71

Re: HG612 / Third Party Settings.

The previous HG612 firmware could have been several versions back - 28SP06/08.

 

Try reflashing HG612 with 30SP08 again - when this completes do a factory reset of the HG612 - I don't think there are any configuration changes needed.

 

Then connect up line from Master Socket to HG612 DSL socket, HG612 LAN1 to HH5 WAN socket - this is good to go...

 

 

0 Ratings
Reply
MrNorma
Contributor
603 Views
Message 32 of 71

Re: HG612 / Third Party Settings.

Reflashed and managed to do a factory reset eventually.

 

Plugged in DSL line anf powered it up.  DSL light flashed 3 times fast and then nothing.  Left it for 10 mins and nothing.

 

Kind of giving up on it for the now as my line stats will be all over the place.  

0 Ratings
Reply
MrNorma
Contributor
574 Views
Message 33 of 71

Re: HG612 / Third Party Settings.

With another firmware upgrade I have it working. My question now is how do i see if g.inp is enabled.
0 Ratings
Reply
Distinguished Guru
572 Views
Message 34 of 71

Re: HG612 / Third Party Settings.

Hooray 🙂
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you found this post helpful, please click on the star on the left
If not, I'll try again 🙂
0 Ratings
Reply
Distinguished Guru
568 Views
Message 35 of 71

Re: HG612 / Third Party Settings.

In Status > WAN > xDSL you should see Path 0 and Path 1
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you found this post helpful, please click on the star on the left
If not, I'll try again 🙂
0 Ratings
Reply
MrNorma
Contributor
559 Views
Message 36 of 71

Re: HG612 / Third Party Settings.

I see both but path1 has no stats
0 Ratings
Reply
Distinguished Guru
556 Views
Message 37 of 71

Re: HG612 / Third Party Settings.

Try telnet and do

xdslcmd info --stats

You should Bearer 0 and Bearer 1 and G.INP stuff like

G.INP Framing: 18 18
G.INP lookback: 19 13
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you found this post helpful, please click on the star on the left
If not, I'll try again 🙂
0 Ratings
Reply
MrNorma
Contributor
544 Views
Message 38 of 71

Re: HG612 / Third Party Settings.

cheers Ray. Will have a look in a mo.

This lol started as I lost 10mb on my download and my ping got slightly higher.
0 Ratings
Reply
MrNorma
Contributor
536 Views
Message 39 of 71

Re: HG612 / Third Party Settings.

very sad face...

 

only showing bearer 0

 

i have the correct firmware so it should support g.inp if it was enabled.

 

When my line was acctivated i had max 80/20 but after 5 days it dropped 10meg and the ping jumped up by 10ms.  A lot ofmpeoplemhad been waiting on the cabinet going live so not sure if thats made a difference.  I am no more than 100m to my cabinet.

 

Is there anyway to see if g.inp has been enabled?

0 Ratings
Reply
Distinguished Guru
534 Views
Message 40 of 71

Re: HG612 / Third Party Settings.

It sometimes takes a while to come on
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you found this post helpful, please click on the star on the left
If not, I'll try again 🙂
0 Ratings
Reply